Actisense OPTO-4 NMEA 0183
Actisense OPTO-4 NMEA 0183
Deliver to:
Auckland 1026,
NZ
Estimated:
$5.99
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
The item you're looking at is currently unavailable or has limited stock, how about this one instead?
Isolate an RS232 (PC) port to protect against ground loops.
The Actisense PC Opto-Isolator Cable (OPTO-4) provides an easy way to link an NMEA® 0183 device to an RS232 (PC) serial port. Providing the necessary isolation to allow a PC (or any other device with a standard full RS232 9-pin port) to meet the latest NMEA 0183 input specification.
Actisense OPTO-4 NMEA 0183 Features:
- NMEA 0183 & RS232 compliant
- Full duplex (two-way) communication
- All baud rates up to 115200 Baud
- Overmoulded case with a narrow profi le for installing in small
spaces
- Transient protection on the PC output line
- Opto-isolation providing 2000 volt protection on the PC input
line
- Reverse voltage protection on the PC input line
- Current limited to protect against cable faults
- Port-powered; takes power from the PC port
- Fully shielded for superior noise rejection
Actisense OPTO-4 NMEA 0183 Specifications:
| Parameter | Description |
|---|---|
| Electrical | |
| NMEA Listener/Input Isolation | 2kV Opto-Isolation between Red/Black NMEA pair and all other connections |
|
NMEA Listener/Input Voltage |
+/-15V Continuous Maximum +/-35V Max <1 Second |
| NMEA Listener/Input Signal Thresholds |
Logic '0' +2V to +15V Logic '1' -15V to 0V |
| NMEA Talker/Output Voltage and Current |
Dependant on Host RS232 Interface. Typically +/-5V to +/-15V @10mA Max |
| RS232 Voltage on Host | +/-7V to +/-15V |
| RS232 Port Total Current Consumption | 2mA to 5mA depending on RS232 Voltage |
| Speed/Baud Rate | 4800 to 115200 Baud |
| Mechanical | |
| Housing Material | PVC Black |
| Thumb Screw Material | PVC Orange |
| Screw | Steel, Nickle Plated, M2.8 Thread |
| DB9 Connector | 9 Pin Female |
| Cable Length | 1.5m |
| Cable Wire | 22AWG (17/34AWG) Tinned Stranded Copper |
| Cable Jacket | PVC |
| Shield | Internal Copper Foil Shield |
| Cable Outer Diameter | 5.5mm |
| Approvals and Certifications | |
| Operating Temperature | -20 degreesC to +70 degreesC |
| Electrical Specification | Meets IEC 61162-2 |
| Weight | 100g |
| Guarantee | 3 Years |
| UL Certification | Cable E137250 |
| RoHs Compliant |
Actisense OPTO-4 NMEA 0183 Quick Start Guide
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.