VETUS Zinc Hull Anode Type 35

Protect your investment

Sailing on salt or brackish waters? The cathodic protection offered by VETUS Zinc Hull Anodes means protection of all metal parts under water. Therefore, anodes is a must not only for steel boats, but also for wooden, fibreglass and aluminium hulls. The material these anodes is of the highest possible standard, the U.S. mil.-A-18001 K. specifications. Anodes which do not meet these specifications have little or no effect at all.

The VETUS Zinc Hull Anodes have a protective layer of paint at the mounting side to prevent damage to the paint work of your boat. These anodes are streamlined and mounted either with specially made studs, which can be welded to a steel hull, or special through-hull bolts for fibreglass and wooden boats. VETUS supply these studs and bolts separately.


VETUS Zinc Hull Anode Specifications:

Weight (kg)	1
Dimensions (length x width x height) (mm)	80 x 45
Protected surface with adequate paint (m)	12
Protected surface with worn out paint (m)	6
Protected unpainted surface (m)	3,5

Note: The anodes are supplied excluding connection kit.