Integrates functionality with the installation advantages of wireless technology

The AutoAnchor 710 Remote Control is a wireless remote control for full windlass control and chain counting with the option of thruster operation.

Function Options
A system with one base station (6 outputs) can operate:1 windlass plus a deck wash and deck light or other auxiliary functions or 1 windlass and 1 or 2 thrusters.

IEEE 802.15.4 compliant
Can co-exist with Bluetooth and WiFi networks nearby. The network operates on different channels to the 2.4Ghz WiFi netowrks and offers a high level of security with each item having a Unique ID, and each transmission containing sender and destination information. This ensures that remotes and base station can only send and receive transmissions to and from registered members of their system.

Frequency Hopping Spread Spectrum (FHSS) provides further security and immunity
Spread Spectrum signals are highly resistant to noise and interference. The AutoAnchor wireless system scans frequencies within the band before transmisison. This ensures that communication is not attempted on a frequency where there is a lot of existing noise and possible interference. Signal strength is displayed on the remote and operating ranges up to 10m (30ft) from base station.

Remote Environmental Protection
Water resistance designed to meet IP67. Remote enclosure has a rubber seal around the perimeter of the case. Shock protection. Remote enclosure with rubber over-moulding to provide protection against shock. The rubber over-moulding also provides grip in wet conditions, and a non-slip quality in rough sailing condition

AutoAnchor 710 Remote Control Features:

• Larger LCD with improved contrast
  
• 2 additional outputs in the base station allow for more installation options A single kit can be used for 1 windlass plus a bow and stern thruster
  
• Antenna plug is standard on the base station
  
• Automatic sensor detection no need to select sensor in the set up
  
• Manual control alarm and stop at docking distance stops the windlass during retrieval when using manual and automatic operations
  
• Swap controls option in set up this option means the Up button can be used as Out and the Down button can be used as In
  
• Drum windlass counting capability
  
• Improved troubleshooting. Simplified diagnostics and built in voltmeter with expanded technician diagnostics
  
• Time out connection between the base station and the console now adjustable up to 20 minutes
  
• Dual speed windlass capability
  
• Options for windlass related actions, using the left and right arrow buttons, no longer limited to anchorwash and anchorlight. Can now be user selected and could include a windlass stow, power cleats, deck wash, deck light
  
• Power enable option now available with off delay for hydraulic, AC, DC and PLC installations
  
• Full windlass control and chain counting
  
• Controls bow and stern thrusters independently and together
  
• Preset the length of rode to deploy
  
• Auto stop and docking alarm when the anchor is close to docking
  
• Counts rope/chain or all-chain rode
  
• Logs windlass operating hours for maintenance
  
• Easy installation and set up
  
• Plug and play sensor installation
  
• Console unit is shockproof, waterproof and will float
  
• High level wireless transmission security includes unique ID and registration for every unit
  
• Safety lock reduces unwanted operation
  
• Ergonomic shape with lanyard connector
  
• Console holder and protective cover
  
• Displays signal strength and battery level
  
• Use with DC, AC and hydraulic windlasses
  
• Antenna available if wireless communication is impeded
  
• Operates in parallel with other control equipment eg toggle switches, foot switches and other electronic controllers
  
• Remote powered by two AA alkaline batteries
  
• The remote displays battery capacity conditions on the screen
  
• The remote has many functions that help to minimise battery consumption.
  
• DC, AC, and Hydraulic systems can be controlled using the interconnection of solenoids or relays
  
• Can operate in parallel with other control equipment eg toggle switches, foot switches, other electronic controllers.
  
• Control output hardware is reverse voltage protected, under-voltage and over-voltage protected, and current limited. All backfeeding protected.
  
• Compatible with all AutoAnchor sensors

AutoAnchor 710 Remote Control Specifications:

• Power Supply: 2 x AA1.5V Batteries
  
• IP Rating: IP67
  
• Operating temperature range: 23°F to 140°F (-5°C to 60°C)
  
• Wireless transmission: 2.4GHz ISM Band, IEEE 802.15.4 Compliant, 64 Bit Unique ID
  
• Wireless range: Typical Minimum 10m (30ft). Range depends on installation
  
• RF Compliance: EN 300 440/328 FCC-CFR-47 Part 15EMC Compliance CEEN60945
  
• Communication Security: 2.4GHz ISM Band

AutoAnchor 710 Remote Control Product Data Sheet