Raymarine EV-100 Evolution Tiller Autopilot System with P70S Control

No calibration required

Engineered for simplicity, the Raymarine EV-100 Evolution Tiller Autopilot System eliminates the need for complicated set up and calibration. Once Evolution is installed, getting started is as easy as switching the autopilot on. Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel’s steering characteristics without any user adjustments. The Evolution EV sensor core can be installed almost anywhere on your boat - above or below deck. Install upside down or off the vessel's centre line. Once installed, setup is easy, with a simple Dockside Wizard to guide you through the process.

What's in the Kit:

• P70S control
  
• E70096 EV-1 Sensor Core
  
• E70098 ACU-100
  
• Q047 Tiller Drive
  
• R70160 Evolution Cabling Kit
  

Evolution AI
This innovative breakthrough in autopilot intelligence enables Evolution autopilots to perceive their environment and then instantly calculate and evolve steering commands to maximise performance. The result is precise and confident course keeping, regardless of vessel speed or sea conditions.

The EV Sensor Core
At the centre of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.

Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalk bus.

EV-1 Systems with Raymarine Drives
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalk networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalk and NMEA2000 networks.

The P70S Autopilot Control Heads
Complete your Evolution autopilot system with a P70S autopilot control. The P70S control heads feature vibrant colour displays and are powered by Raymarine’s intuitive LightHouse user interface. Designed for sailing yachts, the P70S offers simple 1 and 10 degree direct course change push buttons. Use the rotary dial for menu and course changes.

Raymarine EV-100 Evolution Tiller Autopilot System Features:

• Evolution AI
  
• The EV Sensor Core autopilot processor
  
• Autopilot Control Unit (ACU)
  
• The p70 Autopilot Control Heads
  
• EV-1 autopilots for cockpit and Inboard applications
  
• EV-2 for Drive-by-Wire propulsion systems Improved performance Easy installation
  
• Automagic calibration – no sea trial required
  

Raymarine EV-100 Evolution Tiller Autopilot System Specifications:

• Nominal supply voltage: 12 V (powered by SeaTalk system)
  
• Operating voltage range: 10.8 V to 15.6 V dc
  
• Power consumption (taken from SeaTalk system): 30 mA
  
• SeaTalkng LEN (Load Equivalency Number): 1
  
• Sensors: 3-axis digital accelerometer, 3-axis digital compass, 3-axis gyro digital angular rate sensor
  
• Data connections: SeaTalk, NMEA 2000 DeviceNet (EV-2 only)
  
• Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF)
  
• Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF)
  
• Relative humidity: max 93%
  
• Waterproof rating: IPX6
  
• Dimensions: Diameter: 140mm (5.5in)
  
• Depth (including mounting enclosure): 35mm (1.4in), Depth (including wall bracket): 95mm (3.8in)
  
• Weight: 0.29kg (0.64lbs)
  
• EMC compliance: Europe: 2004/108/EC, Australia and New Zealand