BLA Marine 3 Bow Bimini Top Grey 1.8m-2m x 1.3m

All that is necessary to determine which size top to order is choosing the length, height and width that best accommodates your boat and your requirements. Using a tape measure, decide which length top covers the portion of the boat you want covered, i.e. 1650mm or 2400mm. The pivotal mounting point will be approximately at the centre point of the top of each side of the boat. The deck mounts included with the top are designed to mount on a relatively flat horizontal surface. Side mounts are supplied with this product. After determining where the pivotal mount location will be on each side of the boat, measure the distance between these mounting points to determine the width of top you need. While standing inside the boat, measure from the pivotal mounting point straight up to determine desired height. Once you have all the measurements, simply go to the sizing chart on this box and select the one you need. All of the instructions are supplied in the box.

Features

• Rated to 40 knots when fully open
• 100% polyester top
• Bimini sock and rear support arms are included

Accessories
194596 Bimini Clears to suit 1.5m - 1.7m includes zip
194598 Bimini Clears to suit 1.8m - 2.0m includes zip