CruzPro D60 DSP Depth Sounder Square 1000ft

Accurate and reliable readings

The CruzPro D60 DSP Depth Sounder is a compact digital depth gauge that uses Digital Signal Processing (DSP) to reliably display water depth from 1.2 foot (0.4 Metre) to 1000+ feet (365 Metres). Depth can be displayed in feet, metres or fathoms. The D60 also has programmable shallow, deep and anchor drag alarms built-in and can display the depth in feet, metres or fathoms. A keel offset from -20.0 to +20.0 feet can be entered so the D60 shows the depth below the surface, below the keel or below the transducer.

The CruzPro D60 DSP Depth Sounder uses Digital Signal Processing (DSP) to enable sensitivity never before found in such a low cost small sounder. This depth sounder also provides superior high speed rejection of false signals thanks to transducer slap (buffeting), surface turbulence, thermoclines, double bounce. Plus, the D60 is almost immune to other depth sounders and fishfinders operating near-by.

CruzPro D60 DSP Depth Sounder Features:

• Compact form
• Digital Signal Processing (DSP)
• Displays depth from 0.4m (1.2ft) to 365m (1000ft+)
• Can display in feet, metres or fathoms
• Built-in programmable shallow, deep and anchor drag alarms
• Superior high speed rejection of false signals
• Transducer slap (buffeting)
• Surface turbulence
• Thermoclines
• Double bounce
• Five levels of backlighting can be selected for night-time viewing
• All set-up constants are saved in a non-volatile memory

CruzPro D60 DSP Depth Sounder Specifications:

• Operating voltage: 9.5 - 16.0 VDC
• Current drain: 0.030 Amps nominal
• Operating temperature: 32 to 122 deg F (0 to 50 C)
• Display: 4 digit LCD, 5 levels of backlighting, Variable display damping
• Data: Depth 1.2 to 19.9 feet in tenths and 20 - 1000+ feet full digits or Metres, or Fathoms equivalent
• Alarms: Built-in 85 dB audible alarms for shallow, deep and anchor drag
• Keel offset: Adjustable -20.0 to +20.0 feet in tenths
• Dimensions (Dia. x Depth): 2.5 x 4.1in (61 x 104mm)
• Mounting: 2-1/8in (55mm) round hole