CRC Bright Zinc Galvanic Rust Protection Aerosol 400ml

Protect metal from rust

The CRC Bright Zinc Galvanic Rust Protection's unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible resin coating for heavy-duty protection and a bright finish of new galvanising. Pure zinc particles are embedded in a resin system which forms a quick-drying highly-protective coating on bare steel or iron, with more than 50% highest purity zinc in the dried film. This organo-zinc coating provides an effective barrier for protection of treated surfaces from environmental conditions like moisture, humidity, water and heat while the zinc particles - due to sacrificial anodisation of zinc - stop rust and rust creepage if the coating is scratched, abraded or dented.

CRC Bright Zinc provides a gloss top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion. It's ideal for touch-up and repair of damaged galvanised surfaces and effective long-term rust protection with the bright look of a newly galvanised surface. For ultimate protection, prime the metal surface with CRC Zinc It then apply CRC Bright Zinc as a top coat.

CRC Bright Zinc provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs, delivered from a unique aerosol system giving a smooth even coat. Ongoing protection can be achieved through simple re-coating within 5 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.

Uses:

• Structural steel or frames - Welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs
  
• Electrical - Transformers, transmission towers, earth pegs
  
• Farm equipment - Water tanks, tank stands, fences, gates, animal raceways in milking sheds and yards, farm implements and tractor draw bars, metal junction, terminal boxes, pump equipment, corrugated metal buildings
  
• Boats and boat trailers - Shackles, winches, draw bars, subframes, wheel and guards
  
• Car or caravan - Inner door panels, tow bars, exhaust tail pipes and wheel protection under hub caps
  
• Perfect touch-up - For galvanised products which have been cut, drilled or welded
  
• At home - On iron railings, roofing and spouting, gutters, plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges, fences and gates, wrought iron, air conditioning and refrigeration units
  
• Industrial - Equipment and machinery, machine housings
  
• Roading and Construction - Bridges, guard rails, lamp stands
  
• For use on steel or iron - Not effective when used on non-ferrous metals
  
• Wherever iron or steel needs protection and a bright galvanised finish is required
  

CRC Bright Zinc Galvanic Rust Protection Features:

• Zinc-rich - More than 50% highest purity zinc in the dried film, embedded in a protective enamel coating
  
• Protective Coating - Resistant to salt corrosion, water and heat. Powerful protection in harsh conditions
  
• Bright galvanised finish - Ideal for repairing damaged galvanised surfaces to restore rust protection
  
• Excellent adhesive qualities - Forms a tough coat for long-term protection
  
• Easy application - High film build in one step
  
• Heat Resistance - Up to 120 degreesC
  
• Long-term corrosion protection - Corrosion Protection Factor 60 (up to 5 years outdoors before recoating is necessary, depending on conditions)
  
• Sacrificial anodisation of Zinc - Stops rust and rust creepage even when scratched, abraded or dented
  
• Fast drying - Touch dry in 20 minutes, recoat immediately, full cure in 24 hours
  
• Easy re-application over existing film and/or clean surfaces - For ongoing protection
  
• Single coat - No overcoating required. For additional protection, prime the metal surface with CRC Zinc It prior to applying CRC Bright Zinc
  
• Ready to Use Aerosol - No additional mixing or chemical additives required. Easy application. No clean up
  
• Does not contain CFCs, methylene chloride
  
• MPI Approved C23
  

CRC Bright Zinc Galvanic Rust Protection Specifications:

Physical Properties

• Propellant (Aerosol): Hydrocarbon
  
• Flash Point: -81°C (Propellant)
  
• Temperature Range: Up to 120°C
  
• Corrosion Protection Factor: 60
  
• Reapplication Period Indoors: As required
  
• Reapplication Period Outdoors: Up to 5 years, depending on conditions
  
• Colour: Dries to the colour of new galvanising
  

Performance Characteristics

• Touch Dry: 15-20 minutes
  
• Full Cure: 24 hours
  
• Time To Overcoat: 1 hour
  
• Theoretical Coverage: Up to 10m²/1L, Up to 2m²/aerosol can
  
• Clean Up With: Mineral turpentine or white spirits