Davis Mounting Kit for Vantage Pro Systems

Durable and easy to install

Having a proper weather station mounting pole makes installation and proper siting easy. The Davis Mounting Kit is perfect for your Vantage Vue or Vantage Pro2 weather station. It's also an excellent choice for mounting EnviroMonitor Cellular Gateways, EnviroMonitor Nodes, and Sensor Transmitters.

The poles are galvanised, and the mounting hardware is stainless steel. An excellent choice for mounting your weather station on the side of the building above the roofline or on an outdoor pole or fencepost. The mounting pole kit contains two poles - one is 19.5" (0.50 m) long, and the second one is 21" (0.53 m) long. The total length when both poles are connected is 37.5" (0.95 m) long.

What's Included:

• 1 x 19.5" swaged end support tube
• 1 x 21" long extension tube
• 3 x 1-1/2" saddles
• 6 x 5/16" flat washers
• 2 x 5/16" lock washers
• 2 x 5/16" hex nuts
• 1 x 5/16" x 1-1/2" U-bolt
• 4 x 5/16" x 3" lag screws
• 4 x 8" cable ties

Davis Mounting Kit for Vantage Pro Systems Features:

• Part: 7717
• Great for mounting your Vantage Vue or Vantage Pro2 weather station. Convenient for mounting other Davis products including Sensor Transmitters, EnviroMonitor Cellular Gateways, and EnviroMonitor Nodes
• Kit includes two poles and mounting hardware
• Poles can be used separately or together to make a single, larger pole
• One pole is 19.5' (0.50 m) long
• Second pole is 21' (0.53 m) long
• Outside diameter of both is 1.3125' (3 cm)
• Total length with both poles is 37.5' (0.95 m) long
• Includes connector and mounting hardware

Note: To assemble the kit, you will need an adjustable wrench and a drill with a 0.25" (6 mm) bit.

Davis Mounting Kit for Vantage Pro Systems Instruction Manual