CRC Stainless Steel Plus Zinc 400ml

Powerful protection in harsh conditions

The CRC Stainless Steel Plus Zinc's unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating for heavy-duty protection and a hard-wearing stainless steel finish. Pure zinc particles and stainless steel flakes are embedded in a resin system which forms a quick-drying highly-protective enamel coating on bare metal. Stainless steel rises to the surface to provide a durable stainless steel finish over a zinc rich base in the dried film. This organo-zinc coating provides an effective barrier for protection of treated surfaces from environmental conditions like moisture, humidity, water and heat while the zinc particles - due to sacrificial anodisation of zinc - stop rust and rust creepage if the coating is scratched, abraded or dented.

CRC Stainless Steel Plus Zinc provides a gloss top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion. For ultimate protection, prime the metal surface with CRC Zinc It then apply CRC Stainless Steel+Zinc as a top coat. Stainless Steel Plus Zinc provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs, delivered from a unique aerosol system giving a smooth even coat.

Ongoing protection can be achieved through simple re-coating within 5 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.

Uses:

• Stainless Steel: use on welds on stainless steel, where a stainless steel finish is required, safety equipment, shipping containers, wheels, tow bar and trailers
• Architectural - Can be applied on a wide variety of surfaces including metal, timber, plastics and paint to produce a stainless steel finish
• Wherever iron or steel needs protection and a stainless steel finish is required

CRC Stainless Steel Plus Zinc Features:

• Zinc-rich: more than 50% highest purity zinc in the dried film, embedded in a protective enamel coating
• Contains stainless steel: for durable stainless steel finish, no need for top-coating
• Protective coating: resistant to salt corrosion, water and heat. Powerful protection in harsh conditions
• Excellent adhesive qualities: forms a tough coat for long-term protection
• Easy application: high film build in one step
• Heavy-duty: resistant to salt corrosion, water and heat
• Heat resistance: up to 120 degreesC
• Long-term corrosion protection: corrosion protection factor 60 (up to 5 years outdoors before recoating is necessary, depending on conditions)
• Sacrificial anodisation of zinc: stops rust and rust creepage even when scratched, abraded or dented
• Fast drying: touch dry in 20 minutes, recoat immediately, full cure in 24 hours
• Easy re-application over existing film and/or clean surfaces: for ongoing protection
• Single coat: no overcoating required. For additional protection, prime the metal surface with CRC Zinc It prior to applying CRC Stainless Steel+Zinc
• Ready to Use Aerosol: no additional mixing or chemical additives required. Easy application. No clean up
• Does not contain CFCs, methylene chloride
• MPI Approved C23

CRC Stainless Steel Plus Zinc Specifications:

• Propellant: Hydrocarbon
• Flash point: -81 degreesC (Propellant)
• Temperature range: Up to 120 degrees C
• Corrosion protection factor: 60
• Reapplication period indoors: As required
• Reapplication period outdoors: Up to 5 years, depending on conditions
• Colour: Dries to the colour of stainless steel
• Touch dry: 15-20 minutes
• Full cure: 24 hours
• Time to overcoat: 1 hour
• Theoretical coverage: Up to 2m2/aerosol can
• Clean up with: Mineral turpentine or white spirits