VETUS Sani-Processor 230 Volt 50 Hz

#9118782
Warranty Badge - 12-Months
Ships Dec 20 - Jan 31
ONLY $2,089.00

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

Click on the image above to view full picture

More Views

Details

Details

Particularly on larger boats, owners often wish to install deluxe sanitary ware of their preferred style and colour; just like at home. In order to fulfil this requirement, VETUS has developed the Sani-Processor, with an electric macerator and a pump, so that an ordinary domestic toilet may be used on board.

The Sani-Processor can be easily connected to a standard toilet, by means of 102 mm diameter hose (with a minimum fall of 50 mm per metre). When the toilet is flushed, the Sani-Processor will collect the contents, macerate them and pump the resultant slurry into a holding tank or directly overboard, through a hose of only 19 mm diameter. The whole process takes between 10 and 30 seconds and works almost silently. In the unlikely event of a blockage, the unit can be easily cleaned by removing the inspection lid. The connecting hoses must be odour-tight andVETUS recommend the use of VETUS sanitary hose, type SAHOSE19.

TECHNICAL SPECIFICATIONS
  • 230 Volt/50 Hz .
  • Macerator diameter: 98 mm
  • Nominal power consumption: approx. 400 W.
  • Dimensions: 420 x 120 x 360 mm (l x w x h)
  • Hose from toilet to Sani-Processor: 102 mm, maximum length 4 metres.
  • Hose from Sani-Processor to holding tank: 19 mm, maximum length 20 metres.
  • The holding tank may be maximum 4 metres higher than the Sani-Processor
  • Washbasin/bidet connections: 40 mm
  • Weight: 4.8 kg
  • Pump capacity: approx. 50 l/min at 4 m head.

Products You Recently Viewed

Recently Viewed