Maretron FFM100 Fuel Flow Monitor 2-100LPH

Precision fuel flow information

The Maretron FFM100 Fuel Flow Monitor provides precision fuel flow information to help fuel consumption. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nearly that of commercial vessel systems costing tens of thousands of dollars, yet the FFM100 cost less than existing recreational systems found on the market today. Additional benefits of the positive displacement metering technology are the elimination of flow conditioning components such as straighteners and pulsation dampers. Other flow meter technologies require flow conditioning components that increase system and installation cost.

The FFM100 also uses true temperature compensation with embedded temperature sensors within the meters. The returning fuel is generally hotter than the supply fuel and if not properly compensated, inaccuracies as much as 5% can occur in computing the engine's fuel consumption. The FFM100 also detects momentary reverse flow in the fuel lines due to fluctuating pressure caused by the injection pump. Less accurate systems count the reverse fuel flow as part of the consumed fuel where the FFM100 properly accounts for momentary reverse flow. Lastly, the FFM100 can be used for fluid types other than fuel (e.g., water, oil, etc.) by ordering the appropriate flow sender.

Maretron FFM100 Fuel Flow Monitor Features:

• Converts a variety of flow senders (e.g., fuel, water, etc.) to NMEA 2000® Network Data
  
• All flow senders ordered separately depending on application (i.e., single fuel flow sender for gas engine, dual fuel flow senders for diesel engine, water flow sender for sea water, etc.)
  
• Facilitates fuel consumption optimization for reduced fuel operating cost
  
• Uses positive displacement metering technology for superior accuracy over other measurement technology such as turbine meters
  
• Does not require costly fuel conditioning components like flow straighteners and pulse dampers
  
• Implements true temperature compensation with precision built-in thermistors for increased accuracy
  
• Automatically detect reverse flow due to fluctuating pressure difference from injection pumps
  
• Pass particle sizes up to 70 micrometers (diesel fuel filters normally filter down to 2 micrometers to prevent clogging injectors)
  

Product Data Sheet

Note: This product (SKU FFM100-A) also includes 2 x M1AR Sensors, 1 x T connector and 1m cable