Lowrance EP-10 Electronic Probe Fuel Flow Sensor

Get accurate fuel information

The Lowrance Electronic Probe Fuel Flow Sensor tracks engine fuel flow, fuel used, trip fuel used and seasonal fuel used ─ sharing the information with any compatible display unit connected to the NMEA 2000 network. With a speed source in the network, the Fuel Flow Sensor can also calculate fuel economy.

Lowrance Electronic Probe Fuel Flow Sensor Features:

• Includes NMEA 2000 T Connector and two 1-inch (25 mm) hose clamps
  
• Displays current fuel rate or fuel flow
  
• Tracks fuel used, trip fuel used and seasonal fuel used
  
• Calculates fuel economy with networked speed source (GPS or Speed Sensor)
  
• Male Micro-C connector
  

Lowrance Electronic Probe Fuel Flow Sensor Specifications:

• Fuel Line Diameter: 3/8" (9.5 mm) Inside Diameter
  
• Drop cable length: 3m (10ft)
  
• Optimised for 0.6-45 Gal/hr but can measure outside these values
  
• Added Back Pressure to the fuel system:0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
• Installation Location: above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
• Hole required to route through a bulkhead: 7/8" (22mm)

What's in the box:

• Fuel flow sensor
  
• Micro-C T-Joiner
  
• Stainless steel hose clamps
  

Note: For gasoline engines only. Does not work with diesel engines or any fuel system with a return fuel line or sump.