Concrete Repair

ADOS Resamax Epoxy Mortar is a two part silica based epoxy. Once mixed, the putty can be easily moulded to form permanent watertight repairs with a smooth finish to concrete, brick, mortar and plaster. It adheres well to wet surfaces and is suitable for most underwater repairs. In cured form ADOS Epoxy Mortar is many times harder and more impact resistant than concrete has a similar consistency and colour to new concrete and has excellent chemical and UV resistance.

ADOS Resamax Epoxy Mortar Features:

• Permanent and super strong - Cures harder than concrete
• Cures watertight - Suitable for repairs to submerged substrates
• Adheres to wet surfaces - Can be applied underwater
• Excellent cohesive properties in uncured state - Easy to work and mould, ideal when a smooth even finish is required
• Appearance - Similar consistency and colour to new concrete
• Non-slump - Suitable for overhead and vertical applications
• 100% solids - No shrinkage when cured
• Resilient - Excellent resistance to chemicals and UV rays
• Convenient to use - 1:1 formulation, ensures correct mixing each time

ADOS Resamax Epoxy Mortar Specifications:

• Type: Epoxy
• Composition: Silica based epoxy system
• Colour: Similar to new concrete
• Minimum Temperature for Curing: -10 °C
• Service Temperature: Continuous 80 °C, Intermittent 150 °C
• Reactivation: N/A
• Viscosity: Paste-like
• Solids: 100%
• Hold Up: In thick film, excellent. Has an inherent thixotropic aspect, and exhibits no slump during the cure process
• Working Time: Up to 20 minutes at 20 °C
• Thinning: Not required
• Clean Up: Use ADOS Epoxy Solvent Clean Up for cleaning uncured material off utensils. Wash off skin with soap and water only
• Compressive Strength: 97.6 MPa
• Tensile Strength: 26.8 MPa