• Details
• Specifications
• Features
• Reviews
• Questions About Product

Details

Details

General purpose epoxy resin adhesive

The International Epiglue 2-Part Epoxy is a high performance marine and general-purpose epoxy resin adhesive. Its thixotropic nature enables it to be used for both close contact and gap filling joints. It offers a virtually colourless glue line once cured and is suitable for above and below the waterline. And what's more, it's easy to measure and mix so you get professional-quality results every time. Now you can provide your boat with the protection and look it deserves.

International Epiglue 2-Part Epoxy Features:

• General purpose epoxy resin adhesive
  
• Use for both close contact and gap filling joints
  
• Virtually colourless glue line
  
• Easy to use
  

International Epiglue 2-Part Epoxy Specifications:

• Recommended no. of coats: 1
  
• Mix ratio: 2 parts resin, 1 part hardener
  
• Area: Above and below the waterline
  
• Pack sizes: 175g, 385g, 770g, 1.57kg, 3.15kg, and 6.3kg
  

Application and Use:

1. To ensure maximum adhesion, surfaces to be joined should be clean and free from contaminants. Test the surface with a few drops of water. If it beads up, there is contamination. Re-sand the area(s) for bonding.
2. Mix the two components following the recommended mixing ratio of 2 parts resin, to 1 part hardener. Blend thoroughly until a uniform colour is achieved.
3. Apply mixed glue to the surfaces to be bonded.
4. Use clamps, screws, clothes pegs, masking tape, etc. to hold joint in place.
5. Remove excess glue with a rag.
6. Curing times and application temperature ranges for different substrate materials are detailed on product label.

International Epiglue Product Data Sheet

Bulk Items Shipping

This item is classified as a Bulk item and must be processed by a specialised courier.
Please therefore allow an extra 1-7 days above the usual shipping time.

Shipping Rates for Bulk Items