J-B Weld Original Cold Weld Formula Steel Reinforced Epoxy

Strong, lasting bond

The J-B Weld Original Cold Weld Formula Steel Reinforced Epoxy is a cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, this epoxy sets in 20-25 minutes to a dark grey colour. A full cure is reached within 15-24 hours. It has a tensile strength of 3960 PSI and can withstand temperatures up to 550ºF when fully cured. So be prepared for any situation, order yours today.

J-B Weld Original Cold Weld Formula Steel Reinforced Epoxy Features:

• Easy to use
  
• Strength: 3960 PSI
  
• Set Time: 20-25 Minutes
  
• Cure Time: 15-24 Hours
  
• Cure Colour: Dark Grey
  
• Works on multiple surfaces (metal, wood, plastic, tile, PVC, ceramic, fibreglass, carbon, concrete and more)
  
• Great for: Household repairs, automotive, plumbing, marine, crafts and more
  
• Size: 1oz / 28.4g per tube

Instructions:

• Prepare: Clean surface area of dirt, grease, oil, paint or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
  
• Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
  
• Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
  
• Dry: Sets in 20-25 minutes. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (min.) before putting object back in use.