J-B Weld PlasticWeld Quick Setting Epoxy Syringe

#9035543
Warranty Badge - 12-Months
In Stock - Ready to Ship
Why pay $22.77
ONLY $19.99
SAVE $2.78!

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

Click on the image above to view full picture

Details

Details

Why glue it, when you can J-B Weld it

The J-B Weld PlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fibreglass and others. ThePlasticWeld sets in just 5 minutes at room temperature and is fully cured in 1 hour. Now that's quick!

J-B Weld PlasticWeld Features:
  • Strength: 4400 PSI
  • Set time: 5 minutes
  • Cure time: 1 hour
  • 1:1 mixing ratio
  • Specially formulated two-part adhesive and epoxy filler system
  • Provides strong, lasting repairs
  • Bond a variety of surfaces, such as metal, composites, fibreglass and others
  • Cure colour: translucent yellow
  • Syringe type for easy application
  • No waste, no mess cap

Applications:
  • Most hard plastics
  • ABS
  • Fibreglass
  • PVC
  • Glass
  • Vinyl
  • Most composites

Instructions:
  1. Prepare: Clean surface area of dirt, grease, oil, paint or loose debris.
  2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
  3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
  4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time is longer.

Note: For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

Products You Recently Viewed

Recently Viewed