West System 206 Slow Hardener 200ml

The item you're looking at is currently unavailable or has limited stock, how about this one instead?

West System 205 Fast Hardener 200ml

Why pay $35.00

ONLY $22.99

SAVE $12.01!

Details

Details

Low-viscosity epoxy curing agent

The West System 206 Slow Hardener a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.

Project Uses:

• Marine
• Boat Repair
• Bonding
• Fabrication
• Barrier Coating

Cure Time:

• Pot life (100 grams cupful): At 72°F (22°C): 20 to 25 minutes
• Working time (thin film): At 72°F (22°C): 90 to 110 minutes
• Solid state: At 72°F (22°C): 10 to 15 hours

Cure Temp:

• Minimum: At 70°F (21°C)

West System 206 Slow Hardener Safety Datasheet

West System 206 Slow Hardener Technical Datasheet

West System 206 Slow Hardener User Manual and Product Guides

Dangerous Goods Shipping

This item is classified as a Dangerous Good and must be processed by a specialised courier. Please therefore allow an extra 1-7 days above the usual shipping time.

Please note that Dangerous Goods delivery might not be possible if you live somewhere with alternative mail delivery such as a plane or ferry. Please confirm with your local courier if they can deliver Dangerous Goods.

Shipping Rates for Lead Acid Batteries and Corrosives