Turn your laptop into a high definition Fish Finder for serious
sports fishing.
The PCFF80 is a dual frequency, high resolution colour fish
finder that runs on a Laptop or PC with the features and
performance of commercial fish finders.
CruzPro's Eco friendly advanced Digital Signal Processing (aDSP)
reduces the sonar power requirement up to 90% without compromising
performance. Using aDSP technology we can achieve performance
similar or better than CHIRP based systems with much less sonar
driving power. Operating at full power the PCFF80 only outputs 320
Watts yet delvers the performance of systems using 2650 Watts.
The lower power operation introduces much less unwanted noise
into the marine environment.
Dual frequency 200Hz analogue mode for depths to 150M (500ft).
aDSP mode to reach over 300M (1000ft).
50Khz to go 450M (1500ft). With aDSP go even deeper to 900M
(3000ft) and achieve maximum deep water performance.
For serious fishing the Eco friendly aDSP mode uses only 10% of
the power of standard fish-finders this reduces unwanted sonar
clicking noise which could scare fish.
Better high speed running performance with aDSP reducing almost
all noise from transducer slap.
Features:
- Auto/manual control modes, A-Scope, Depth dependent gain
control, Fresh/salt water modes, 4 different Fish alarms,
Deep/shallow water alarms, Full and split screen, 6 zoom settings,
White line, Bottom lock, Temperature, Chart speed, 6 depth ranges,
10 Noise filter settings, 8 Clutter settings, adjustable colour
pallets, Record and playback, File logging, Upgradeable
software
- Includes depth/temperature transducer (THDT2). Other transducer
options are available.
- Compatible with Windows XP, Vista, Win7, Win10
Specifications:
- Operating Voltage: 9.5 to 16.0 VDC, 0.05 amps nominal, 4.7 amps
peak at max power
- Output Power: 2560 watts peak-to-peak (320W RMS). 25KW DSP
processed power (3200 WRMS)
- Depth Capability: Minimum Depth - 3 feet (1M) 1000 feet or more
at 200kHz for both shallow and deep water high resolution 2500 Feet
or more at 50kHz
- Operating temperature: 0 to 50 deg Celsius ( 32 to 122 deg
Fahrenheit).
- Interface Box: 100 x 80 x 50 mm (4 x 3.2 x 2 inch). Powder
Coated Aluminum Extrusion
- Communications Interface: RS-232, 115 KBaud, serial data USB
1.1 and USB 2.0 compatible (comes with both USB and RS232)
Communications LED blinks activity
- Operating System/Hardware Requirements: WIN98 SE, NT, 2000, XP,
Vista, Win7 500 Mhz Pentium PC (or better) Serial Port (16550
compatible UART) and/or USB 32MB RAM 50MB Hard Drive space SVGA
Graphics (1024 x 768 resolution) Mouse / Keyboard
- Transducer: Dual Frequency 50/200kHz, Depth/Temperature, Glass
reinforced nylon thru-hull with 30 foot (9.7M) cable. Transom mount
and bronze transducers also available.
- Signal Processing: 2 analog and 2 Digital Processing (DSP)
modes Analog Mode #1: Fixed gain Analog Mode #2: Time varying gain
(TVG) DSP Mode #1: Using correlation DSP Mode #2: Using quadrature
correlation