Excellent deep water detection without drilling your boat

If drilling a transducer is not recommended then the Airmar M260 In-Hull Transducer is the perfect solution for you! Installation simply requires adhering the tank to the inside of your vessel, leaving a clean and smooth hull exterior.

Its construction utilises separate 50 kHz and 200 kHz elements for excellent deep-water performance and exceptional bottom and water-column detail. They are housed inside the tank filled with mineral oil to reduce false echoes. The M260’s narrow beam provides crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks. In-hull mounting eliminates cavitation and turbulence under the transducer’s face, resulting in precise readings even at boat speeds above 20 knots (23 MPH).

Airmar M260 In-Hull Transducer Features:

• Top-of-the-line broadband, in-hull transducer
  
• Recommended for solid fiberglass hulls
  
• Depth only
  
• Innovative tank design allows for bow-stern or port-starboard mounting
  
• Non-toxic anti-freeze (propylene glycol) is used to fill the tank
  
• Fiberglass resin is used to adhere tank to the hull
  
• Interfaces to any 600 W or 1 kW echosounder
  
• Boat Size: 8 m (25’) and up
  

Airmar M260 In-Hull Transducer Specifications:

• Weight: 6.2 kg (13.5 lb)
  
• Hull Deadrise: 0° to 30°
  
• Acoustic Window: Layered plastic urethane
  
• Maximum depth range:
  50kHz: 529 to 735m
  200kHz: 206 to 294m
  

Note: Hull should be no more than 1 inch thick. Not recommended for cored hulls.