Airmar SS510 EchoRange Stainless Analog Depth Transducer 200kHz with 20m Cable

High frequency ultrasonic transducer

• Part: SS510ER-200-66
• Acoustic window: Urethane
• Applications: Bridge scour inspection systems, Portable hydrographic survey, Dredging, Autonomous Surface Drones, Hydrodrones
• Beam angle: 9°
• Cable length: 20m
• CE certification: Marine standard IEC60945
• Comm method: NMEA 0183/RS422
• Connector: Bare Wire
• Current draw: 150 mA @ 12 V for 200 kHz
• Data output: Smart Sensor
• Depth accuracy: 99.46% at full range (see accuracy table for more info)
• Depth display Resolution: 1 cm (.40")
• Display connector: 0
• Echo envelope baud rate: 921600
• Flash reprogrammability: Using boot loader with encryption
• Frequency band: 200 kHz
• Full auto mode data output rate: From 0.1 to 25 sec/interval
• Housing depth rating: Submersible to 10 m (33')
• Manual mode: Output rate equal to ping rate
• Maximum depth reading: 200 m (656'), limited in manual mode
• Minimum depth reading: 0.4 m (15.75"), limited in manual mode
• Mounting options: Portable mount for installation on survey poles / Internal or external hull mount
• NMEA 0183 baud rate: 4800 (Default)
• Operating Temp Range: -5C to +60C
• Power and data cable: ER SS510: C304, 4 twisted pairs with TPR jacket
• Power supply voltage: 9 to 40 VDC, Regulated
• Reverse polarity protection: Yes
• Signal type: NMEA-Smart
• Stem thread: 1/2"-14 NPS
• Storage temperature range: -30 to 70°C (-22 to 158°F)
• Temperature resolution: 0.09C
• Temperature sensor: 10k ohm +/-0.05C accuracy
• Transducer functions: Depth, Temperature