Isotherm Compact Classic 2016 Air Cooled DIY Refrigeration Kit

Easy to install DIY cooling kit

When standard units don't fit, a DIY kit is a great alternative. The Isotherm Compact Classic 2016 Air Cooled DIY Refrigeration Kit is designed for do-it-yourself installation and comes complete with all the parts and components required. To simplify the installation, the system is split into two sections: the compressor/condenser unit and the evaporator. These sections are joined together by a flexible pipe fitted with quick-fitting connections, which can be easily connected and disconnected repeatedly without loss of refrigerant.

To achieve good operating results, the following is essential:

• The refrigerator must be well insulated. Use polyurethane or similar foam 30 mm (1¼") thick for 50 litre (1.8 cu.ft.) boxes, 50 mm (2") for boxes up to 80 litre (2.8 cu.ft.) and 100 mm (4") or more for larger boxes.
  
• Battery capacity should be at least of 75 Ah to enable sufficient power to be stored during engine operation.
  
• All the electrical power supply equipment such as alternator, regulator, cables, connectors and batteries must be kept in good condition
  

Isotherm Compact Classic 2016 Air Cooled DIY Refrigeration Kit Features:

• 12/24 volt
  
• Evaporator: Flat
  
• Dimensions Evaporator (H x W): 1200 x 190 mm
  
• Compressor Dimensions (L x W x H): 315 x 160 x 155 mm
  Kit includes compressor mounting bracket
  

Isotherm Compact Classic 2016 Air Cooled DIY Refrigeration Kit Specifications:

• Voltage: 12/24 volt
  
• Power consumption: 6A
  
• Compressor: BD50F air cooled
  
• Refrigerant: R134a (filled amount written on sticker on compressor top)
  
• Capacity:
  Max. Box Volume Fridge: 200L
  Max. Box Volume Freezer: 66L
  
• Fuse: 15A - 12V / 7.5A - 24V
  
• Battery protection: Cut-out at 9.6 V (21.3), cut-in 10.9 V (22.7)
  
• Fulfills EMC directives, CE marked
  

Isotherm Compact Classic 2016 Air Cooled DIY Kit Installation Manual