Fynspray Gear Pump 1/2in
Fynspray Gear Pump 1/2in
Buy now, pay later & Finance Options
Find Local Store
The WS 32 has a special long-wearing pressure metal body and is fitted with non-corrosive manganese bronze gears and stainless steel shafts. The pumps are equipped with grease points for full lubrication, and are built for long life and maximum performance. All pumps are factory tested and fully guaranteed against faulty workmanship.
Body: Bronze
Gears: Manganese Bronze
Shaft: Stainless Steel
Bearings: 2 x Plain Bearings
Seal: Graphite Impregnated Braided Packing
Boxed Weight: 1.850kg, Long Shaft: 1.940kg
Pump Specifications Based on Water
| Flow Rate Liters/Min | |||||
| Bar | 500rpm | 600rpm | 700rpm | 800rpm | 900rpm |
| Open | 9.1 | 9.5 | 10.9 | 13.1 | 14.6 |
| 1.0 | 7.5 | 7.9 | 9.4 | 11.2 | 12.5 |
| 2.0 | 5.7 | 6.6 | 8.0 | 9.7 | 10.6 |
| 3.0 | 4.5 | 5.8 | 7.3 | 8.8 | 10. |
| 4.0 | 3.4 | 5.0 | 6.6 | 8.4 | 9.5 |
| 5.0 | 3.2 | 4.6 | 6.2 | 7.7 | 9.1 |
| 1 Bar = 1kg/cm2 = 32.8ft head = 14.26psi | |||||
Product Code: WS32
Advisory on the images used for this listing: The images used in this product listing are based on information provided to us by our suppliers and may represent a product range, or be for illustration purposes only, and may not be an exact representation of the product, and therefore should be used as a general guide only.