Gas Leakage Detector

Safety first

Gas leaks can be incredibly dangerous, even small ones. With the Gas Leakage Detector, run a quick check over your house or gas powered devices to make sure all outlets are safely sealed. Hold the power button for a few seconds and then place the detector near the suspected leak and visual/audible warnings will sound if the leak is bad, moderate or safe. Red (Hi), orange (Lo), and green (safe) LEDs denote the severity of the leak.

Gas Leakage Detector Indications:

• Green - Power on with short beep / safe with no alarm
• Yellow - Lo alarm with short beep >2000ppm (0.2%) of methane (natural gas) detected
• Red - Hi alarm with long beep >4000ppm (0.4%) of methane (natural gas detected

Gas Leakage Detector Specifications:

• Measurement ranges: 0-10,000 ppm
• Operating voltage: 3V DC (1.5V x 2pc) AAA / LR03 / AM4 etc. alkaline type
• Max operating current: <200mA
• Operating conditions: 10° - 50°C ; <95% RH
• Power on: Press and hold for 3 seconds
• Auto power off: Approximately 3 minutes
• Requires 2 x AAA batteries (not included)
• Sensor detects butane, propane, acetylene, and methane (natural gas)
• Dimensions: 165(L) x 27(W) x 21(D)mm