Hy-ProDrive Hydraulic Reversing Pump

For optimum hydraulic control

The Hy-ProDrive Hydraulic Reversing Pump is a hydraulic reversing pumpset designed to interface a hydraulic steering system with electric or autopilot control, suited to work with Furuno's NavPilot autopilot series. It interacts with the autopilot's hydraulic steering system, controlling the rudder's speed to provide the best steering results. Its reversing gerotor gear pump and valves run smoothly with minimum noise and vibration, ensuring you of an incredibly quiet operation.

Hy-ProDrive Hydraulic Reversing Pump Features:

• Easy installation
• Works with the Furuno NavPilot autopilot series
• Reversing gerotor gear pump and valves run smoothly with minimum noise and vibration
• Capable of working with both balanced and unbalanced cylinders
• Ball bearing shaft supports both ends of motor
• Extended motor shafting eliminates pump/motor coupling

Hy-ProDrive Hydraulic Reversing Pump Specifications:

• Ingress protection: IP67
• EMC Protection: BS EN 60945:2002 (DC)
• Ignition Protection: BS EN 28846:1993
• EN ISO 10592: 1995 (Small Craft - Hydraulic Steering Systems)
• Ambient Operating Temperature: -15 to +55 deg C
• Max Pressure: 55 bar (intermittent operation)
• Reservoir line: 2 bar Max
• Ports: G1/4 (BSPP) Parallel
  A = ram port
  B = ram port
  R = reservoir port
• Rotation: Red lead to - positive Pressure to A port
  Black lead to positive - Pressure to B port
• Hoses: Suitable for working pressure 55 bar
• Minimum burst pressure: 100 bar
• Fluid: ISO VG10 to VG40 Hydraulic mineral fluid meeting ISO 6743-4 HV

Model	Nominal L/min	Typical amp-hour bar at 25% duty	Max current Intermittent 55 bar
PR0612	0.6LPM	0.9 (12V)	9.0 (12V)
PR1012	1.0LPM	2.2 (12V)	19.0 (12V)
PR1024	1.0LPM	1.0 (24V)	9.0 (24V)
PR1512	1.5LPM	2.4 (12V)	24.0 (12V)
PR1524	1.5LPM	1.2 (24V)	11.0 (24V)
PR2024	2.0LPM	1.3 (24V)	12.0 (24V)