Upgrade your marine communication experience
Icom has improved upon the IC-M506’s top-quality design to introduce the
Icom IC-M510 Fixed Mount VHF/DSC Marine Transceiver. This enhanced version is packed full of the same features you’ve come to love with the IC-M506 and more! It’s equipped with an integrated AIS receiver, NMEA connectivity, active noise cancelling plus Icom’s intuitive menu-driven user interface. This new AIS version provides users with the ability to receive AIS and see surrounding vessel traffic in real-time whilst also being able to make individual DSC calls to other selected boats.
Integrated AIS Receiver
With its integrated AIS receiver, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.
Radio Control and Intercom Via Your Smartphone
Use the RS-M500 app (for iOS™/Android™) to remotely control the IC-M510 through WLAN. Up to three smartphones can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™. Intercom function between your smartphone and the radio is also available.
New Sleek Design
The IC-M510 is slim (depth: 53.6 mm) and easy to install in your boat. It’s all-new sleek design is suitable for either panel or trunnion mounting.
Wide Viewing Angle Colour TFT LCD
The colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions.
Simplified Navigation Function
The Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints.
Provides Clear, Loud Audio
The IC-M510’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.
Built-in 50 CTCSS and 104 DTCS Tones With Split Tone Function
The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The split tone function allows you to set CTCSS/DTCS tones separately for repeater uplink and downlink on a per channel basis.
Interface BOX for NMEA 2000™ and Hailer Compatibility
The optional CT-M500 wireless interface box (sold separately) provides NMEA 2000™ connectivity and a Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point.
Icom IC-M510 Fixed Mount VHF/DSC Marine Transceiver Features:
- Radio Control and Intercom via Your Smart Device
- Wide Viewing Angle Colour TFT LCD
- New sleek design
- AIS Target Call with MA-510TR
- Active Noise Cancelling
- NMEA 0183/HS connectivity, NMEA 2000 via CT-M500 (sold separately)
- Integrated GNSS receiver
- P68 advanced waterproofing (1 m depth of water for 60 minutes)
- Automatic Foghorn function (CT-M500 required)
- Voice Scrambler with optional UT-112A (sold separately)
- AquaQuake™ prevents audio degradation from a water-logged speaker
- Supplied speaker-microphone, HM-205RB
- External speaker connection
- Controlled with COMMANDMIC HM-195 or HM-229 series (sold separately)
- Supports 4-digit channels
Icom IC-M510 Fixed Mount VHF/DSC Marine Transceiver Specifications:
General
- Frequency coverage:
- TX: 156.025 ~ 157.425 MHz
- RX: 156.050 ~ 163.275 MHz
- WX CH: 161.650 MHz to 163.275 MHz
- DSC (CH70): 156.525 MHz
- Mode: 16K0G3E (FM), 16K0G2B (DSC)
- Operating temperature range: –20°C ~ +60°C, –4ºF ~ +140ºF
- Current drain (at 13.8 V): 5.0 A maximum (TX high 25 W); 3.3 A maximum (RX Maximum audio)
- Power supply requirement: 13.8 V DC (11.7 ~ 15.9 V DC) Negative ground
- Frequency tolerance: 0.5 kHz
- Antenna impedance: 50 Ω nominal
- Dimensions (approximate, projections not included)(W x H x D): 175 x 110 x 53.6mm
- Weight (approximate): 730 g / 1.6 lb (Not including microphone)
Transmitter
- Output power: 25 W or 1 W
- Modulation system: Variable reactance frequency modulation
- Maximum frequency deviation: ±5 kHz
- Spurious emissions: Less than –70 dBc (High Power); less than –56 dBc (Low Power)
- Adjacent channel power: More than 70 dB
- Audio harmonic distortion: Less than 10 % (at 60% Deviation)
- Residual modulation: More than 40 dB
- Audio frequency response: +1 dB to –3 dB of 6 dB octave from 300 Hz to 3000 Hz
Receiver
- Receive system: Double conversion superheterodyne
- Sensitivity:
- FM: –10 dBμ at 12 dB SINAD
- DSC (CH70): –1 dBμ emf (1% BER)
- Squelch sensitivity: Less than –7 dBμ
- Intermodulation rejection ratio:
- FM: More than 75 dB
- DSC (CH70): More than 68 dBμ emf (1% BER)
- Spurious response:
- FM: More than 75 dB
- DSC (CH70): More than 73 dBμ emf (1% BER)
- Adjacent channel selectivity:
- FM: More than 75 dB
- DSC (CH70): : More than 73 dBμ emf (1% BER)
- Audio output power
(at 10% distortion into a 4 Ω
External Speaker): More than 15 W
- Hum and noise: More than 40 dB
- Audio frequency response: +1 to –3 dB of –6 dB/octave range from 300 Hz to
3000 Hz
Built-in GPS
- Channel: Maximum 24 ch (Acquisition, tracking); Maximum 12 ch (Calculation)
- Deferential satellites: WAAS, EGNOS, MSAS, GAGAN
- Corresponding GNSS: GPS, GLONASS, SBAS
- Receiving frequency: 1575.42 MHz (GPS, SBAS); 1598.0625 MHz ~ 1605.375 MHz (GLONASS)
Wireless LAN
- Wireless LAN standard: IEEE802.11 b/g/n
- Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
- Channels: 1 to 13 (2.4 GHz band); May differ depending on the country of use
- Output power: Less than 10 mW/MHz
Icom IC-M510 Fixed Mount VHF/DSC Marine Transceiver Product Manual
