Newmar Phase Three Series 24 Volt Battery Chargers

Smart battery charging technology for 24-volt systems

These Newmar Phase Three Series 24 Volt Battery Chargers interact with batteries providing the optimum three stage charge process for fast recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts output voltage to adapt to gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries' ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.

Newmar Phase Three Series 24 Volt Battery Chargers Features:

• "Smart" circuitry provides three stage charging - bulk, absorption, float
  
• Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
  
• Multiple isolated output banks; ammeter indicates total output current
  
• Optional sensor adjusts output voltage based on battery temperature
  
• Current limiting-prevents damage from overloading
  
• Use as a power supply; can power loads without a battery in line
  
• Built to last - rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
  
• Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
  
• Install in conjunction with PT-MCU for additional control and monitoring
  
• ABS type approval for battery charging and power supplies
  

Newmar Phase Three Series 24 Volt Battery Chargers Specifications:

Specifications	PT-24-8W	PT-24-13W	PT-24-20U	PT-24-45U	PT-24-60W	PT-24-95U
Input VAC (50-60 Hz.)	85 - 264	90 - 132, 180 - 264	85 - 135, 170 - 270	90 - 264	207 - 253	90-264
Input Amps @ F.L. @ 115/ 230 VAC	2.8/1.4	6.5/4	6.8/4.3	12.0/7.0	NA/13	26/14
Power Factor	.98@115V, .93@230V	0.7	0.7	.98@115V, .95@230V	0.7	.98@115V, .95@230V
Max Output Amps	8	13	20	45	60	95
Output Banks	3	3	3	3	3	3
Battery Capacity (Amp-Hours)	16 - 80	26 - 130	40 - 200	90 - 450	120 - 600	180 - 950
Operating Temp. Ref.	T-1	T-2	T-3	T-5	T-4	T-5
Case Size	A-1	A-1	A-2	A-4	A-5	A-5
Weight: Lbs./Kg.	8.0/4.0	8.0/4.0	12.0/6.0	12.0/6.0	24.1/11	24.5/11
Sensor Model	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24	TP	TCS-12/24
Remote Panel	RP	RP	RP	RP	NA	RP
Compliance Ref.	CG, CE, ABS	CG, ABS	CG, CE, ABS	EN, CE, ABS	EN, CE, ABS	EN, CE, ABS

Temperature Rating References:

Operating Temp. Ref.	Temperature	Derate Linearly From
T-1	-10v C to +60˚ C	100% @ 40˚ C to 60% @ 60˚ C
T-2	-10˚ C to +60˚ C	100% @ 50˚ C to 60% @ 60˚ C
T-3	-20˚ C to +60˚ C	@ 50˚ to 60% @ 60˚ C
T-4	-20˚ C to +50˚ C	Full output
T-5	-20˚ C to +70˚ C	100% @ 50˚ C to 50% @ 70˚ C

Case Size References:

Reference	Dimensions (HxWxD) in	Dimensions (HxWxD) cm
A-1	11.2A x 7.7 x 4.75A	28.4A x 19.6 x 12.1A
A-2	13.85B x 9.5 x 4.8B	35.2B x 24.1 x 12.2B
A-3	13.8C x 9.8 x 5C	35C x 24.9 x 12.7C
A-4	14.8D x 9.6 x 5.6D	37.6D x 24.4 x 14.2D
A-5	17.5E x 12 x 7.2E	44.5E x 30.5 x 18.3E

Note: With Drip Shield Installed A Add 1.1" (2.8 cm) to height and .92" (2.3 cm) to depth; B Add .75" (1.9 cm) to height and 1.35" (3.4 cm) to depth; C Add 1.27" (3.2 cm) to height and 1.1" (2.8 cm) to depth; D Add 1"; (2.54 cm) to height and .5" (1.27 cm) to depth; E Add 2" (5.08 cm) to height and 1" (2.54 cm) to depth