International Epiglue 2-Part Epoxy
International Epiglue 2-Part Epoxy
Deliver to:
Auckland 0626,
NZ
Estimated:
$15.04
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
General purpose epoxy resin adhesive
The International Epiglue 2-Part Epoxy is a high performance marine and general-purpose epoxy resin adhesive. Its thixotropic nature enables it to be used for both close contact and gap filling joints. It offers a virtually colourless glue line once cured and is suitable for above and below the waterline. And what's more, it's easy to measure and mix so you get professional-quality results every time. Now you can provide your boat with the protection and look it deserves.
International Epiglue 2-Part Epoxy Features:
- General purpose epoxy resin adhesive
- Use for both close contact and gap filling joints
- Virtually colourless glue line
- Easy to use
International Epiglue 2-Part Epoxy Specifications:
- Recommended no. of coats: 1
- Mix ratio: 2 parts resin, 1 part hardener
- Area: Above and below the waterline
- Pack sizes: 175g, 385g, 770g, 1.57kg, 3.15kg, and
6.3kg
Application and Use:
1. To ensure maximum adhesion,
surfaces to be joined should be clean and free from contaminants.
Test the surface with a few drops of water. If it beads up, there
is contamination. Re-sand the area(s) for bonding.
2. Mix the two components following the recommended mixing ratio of 2 parts resin, to 1 part hardener. Blend thoroughly until a uniform colour is achieved.
3. Apply mixed glue to the surfaces to be bonded.
4. Use clamps, screws, clothes pegs, masking tape, etc. to hold joint in place.
5. Remove excess glue with a rag.
6. Curing times and application temperature ranges for different substrate materials are detailed on product label.
2. Mix the two components following the recommended mixing ratio of 2 parts resin, to 1 part hardener. Blend thoroughly until a uniform colour is achieved.
3. Apply mixed glue to the surfaces to be bonded.
4. Use clamps, screws, clothes pegs, masking tape, etc. to hold joint in place.
5. Remove excess glue with a rag.
6. Curing times and application temperature ranges for different substrate materials are detailed on product label.
International Epiglue Product Data Sheet
Dangerous Goods Shipping
This item is classified as a Dangerous Good and must be processed by a specialised courier. Please therefore allow an extra 1-7 days above the usual shipping time.Please note that Dangerous Goods delivery might not be possible if you live somewhere with alternative mail delivery such as a plane or ferry. Please confirm with your local courier if they can deliver Dangerous Goods.
Bulk Items Shipping
This item is classified as a Bulk item and must be processed by a specialised courier.
Please therefore allow an extra 1-7 days above the usual shipping time.
Shipping Rates for Bulk Items
See the table below for the cost of shipping Bulk items.
|
Auckland
|
Auckland Rural
|
North Island Metro
|
North Island Rural
|
Great Barrier Island
|
South Island Metro
|
South Island Rural
|
|
|
Bulk <25 KG |
$79.99 |
$79.99 |
$109.99 |
$109.99 |
$109.99 |
$139.99 |
$139.99 |
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.