Jabsco PAR-Max 3 Water Pressure System Pump 12VDC 11LPM 40PSI

Smoother, quieter and more efficient than ever

The new and improved Jabsco PAR-Max 3 Water Pressure System Pump takes inspiration from the previous version and enhances its capabilities even further. Continuing Jabsco’s dedication to producing top-quality products, this water pressure system pump features a heavy-duty motor that’s protected by an automatic thermal overload cut-out for enhanced longevity. The multi-diaphragm design self-primes to 3m vertical lift and can even run dry without damage.

The bypass feature ensures smooth and quiet flow, while the integrated pressure switch allows for on-demand operation. The pump also comes complete with quick-connect ports for easy installation and maintenance. Get the smooth, constant flow of pressurised water without the added noise. Grab and install your very own Jabsco PAR-Max 3 Water Pressure System Pump today!

Jabsco PAR-Max 3 Water Pressure System Pump Features:

• Efficient, high-flow, self-priming pump serving 2 or more outlets
• Multi-diaphragm design self primes to 3m vertical lift
• Can run dry without damage
• Quiet running
• Motor protected by automatic thermal overload cut-out to prevent overheating
• Bypass feature reduces cycling and provides smooth, quiet flow
• Integrated, sealed pressure switch
• Supplied with 2 x 1/2in (13mm) straight hose barb

Jabsco PAR-Max 3 Water Pressure System Pump Specifications:

General

• 31395-4012-3A
• Application: Marine water pressure system
• Ambient temp range: 32 - 140F (0 - 60C)
• IP rating: IPX6
• Packed dimensions: 394 x 152 x 140mm
• Pump weight: 1.5kg

Materials

• Upper housing: Fibre reinforced polypropylene
• Lower housing: Fibre reinforced polypropylene
• Check valve retainer: Polypropylene
• Diaphragm: Santoprene
• Check valves: EPDM
• Switch diaphragm: EPDM
• Byprass diaphragm: EPDM
• PH seals: EPDM
• PH fasteners: Stainless steel
• Baseplate: N/A - slide in rubber feet
• Motor casing: Enclosed in protective plastic casing

Hydraulic Performance

• Open flowrate: 11.3 LPM / 3 GPM
• Pressure switch cut-off: 40 PSI (2.8 BAR)
• Max operating pressure: 40 PSI (2.8 BAR)
• Max inlet pressure: 30 PSI (2.1 BAR)
• Internal bypass: Yes
• Fluid temperature range: 32 - 140F (0 - 60C)
• Self-Priming capability: Up to 10ft (3m) dry prime
• Run-dry capable: Yes

Electrical Performance

• Nominal voltage: 12VDC
• Voltage range: 9 - 13.6VDC
• Max current draw: 6A @ 40 PSI (2.8 BAR)
• Fuse size: 10A (not included)
• Duty cycle: Intermittent
• Leads: 12in (305mm), 16 AWG (1.5mm^2)
• Wire connection: Stripped wire

Compliance

• CE: Yes
• RCM: Yes
• ISO 8846 ignition protected: Yes

Note: This product listing does not include inlet strainer.