Shimano Ocea Jigger LD 2500MG Abyss SW Jig Combo 5ft 3in PE8 300-400g 1pc

Made for fighting BIG, bad fish

The Shimano Ocea Jigger LD 2500MG Abyss SW Jig Combo is a fantastic new rod and reel set designed for avid jigging enthusiasts. You get the powerhouse performance of the Ocea Jigger LD 2500MG Jigging Reel, perfectly complemented by the lightness and exceptional strength of the Abyss SW Spiral Wrap OH Jig Rod. Ready to take on BIG, bad fish? Get the Shimano Ocea Jigger LD 2500MG Abyss SW Jig Combo, gear up and go!

The Reel
The Shimano Ocea Jigger LD 2500MG Jigging Reel levels up the classic Ocea Jigger even further! Sporting a new large T-type handle knob and 105mm cold forged handle arm, this powerhouse reel showcases a range of features designed specifically for jigging.

The Shimano Ocea Jigger LD 2500MG Jigging Reel utilises an exclusively designed, highly rigid, cold-forged drag lever that enables a smoother operation. It’s equipped with a double-drag structure with two drag washers. This technology successfully produces high drag force with low thrust and significantly less binding. It also allows the reel to achieve up to 30% reduction in rotational resistance when compared to conventional models of the same size.

HAGANE Body
The HAGANE Body is a metal reel body with exceptionally high rigidity. The body rigidity and impact resistance virtually eliminate body flexing on the reel while fighting fish. The result transforms the angler’s actions directly into cranking power.

Infinity Drive
Infinity Drive is an advanced structure that produces lower friction and lighter winding. The pinion gear is supported by the spool shaft instead of the pinion gear bearing on the spool side. Rotational resistance of the gear section has been reduced without compromising gear strength.

X Protect
X Protect provides high-level water resistance to the inside bearing of the drive gear shaft with waterproof construction.

S Compact Body
S Compact Body provides comfortable palming by making the side plate smaller than the handle.

S A-RB Bearings
S A-RB Bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides. These shields reduce the possibility of salt or sand inhibiting the rotation of the bearing.

The Rod
The Shimano Abyss SW Spiral Wrap OH Jig Rod has been designed, tested, redesigned, tested, tweaked and tested again by Team Shimano and Tony Orton from Offshore Adventures and his busy charter crews.

Shimano's latest range of blue water-centric rods is built on ultra-tough Shimano T45 graphite blanks and fitted with top-quality Fuji SiC/SiN II guides and Aftco/Fuji reel seats. The all-new Shimano Abyss SW Spiral Wrap OH Jig Rod is a dynamic, lightweight yet very strong tamer of the powerful blue water species like Kingfish, Bass, Hapuku, Tuna, Billfish and the mighty Broadbill Swordfish. It's engineered not only to look awesome from the tip to the butt section but also completes MSL tests of well over specified line ratings at 45° and 60° respectively. And not only that, it's built tough enough to handle the rigours of day-to-day charter work. Get ready to do some serious fishing!

Shimano Ocea Jigger LD 2500MG Jigging Reel Features:

• Spool lock mechanism
• Line line cam attached
• Strike stopper button
• Drive gear
• Thumbing space
• Newly developed large sized handle knob
• Cold forged long crank handle
• Cold forged high rigidity clutch lever
• HAGANE body
• Infinity drive
• X Protect
• S Compact body
• S A-RB Bearings

Shimano Abyss SW Spiral Wrap OH Jig Rod Features:

• Dynamic, lightweight yet very strong
• Completes MSL tests of well over specified line ratings at 45° and 60°
• Tough enough to handle the rigours of day-to-day charter work
• Shimano T45 graphite blanks
• Fuji SiC/SiN II guides
• Aftco/Fuji reels seats
• Pieces: 1
• Length: 5ft 3in
• Rating: PE8; 300-400g

Shimano Ocea Jigger LD 2500MG Jigging Reel Specifications:

• Product code: OCEAJGLD2500MG
• Gear ratio: 5.7:1
• Drag: 20kg
• Weight: 690kg
• PE line capacity: PE3 - 670m, PE4 - 500m, PE5 - 400m
• PowerPro line capacity: 40lb - 560yd, 50lb - 470yd, 65lb - 340yd
• Retrieve per crank: 107cm
• Handle length: 105mm
• Bearings: 8 + 1