Kenwood KAC-M3004 Compact 4-Channel Digital Amplifier 400W

Designed to last

• CEA-2006 Compliant
• Class D
• 2 Ohms Load Capability
• Speaker Level Input
• Signal Sensing Turn-on
• Power MOS-FET Switching Power Supply
• Extruded Aluminium Heat Sink Design

Kenwood KAC-M3004 Compact 4-Channel Digital Amplifier Specifications:
• Power Output: 50 Watts RMS x 4 at 4 Ohms and ≤1%THD+N
• Signal-to-Noise Ratio: 76dBA (Reference: 1Watt into 4Ohms)
• Maximum Power Output: 600W
• Signal to Noise Ratio: 89dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response: 20Hz-20kHz (+0dB, -1dB)
• Input Impedance: 10k ohm
• Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
• Bridged connection: 4Ω to 8Ω allowable
• Dimensions(WxHxD): '6-1/2 X '1-3/4 X '3-7/8 inch
• Operating Voltage: 14.4V（11-16V allowable）
• Current Consumption: 22 A

Audio Section
• Low-Pass Filter: Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
• High-Pass Filter: Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
• Filter Selector 1: LPF-OFF-HPF
• RCA Input Sensitivity: 0.2 V - 5.0 V
• Speaker Level Input Sensitivity: 4.0 V - 12.0 V

Terminals
• Battery & Ground: Screw Type Terminal Block (Ni) (M4)
• Speaker Output: MOLEX Connector with AWG16 200mm Wire
• Line In: RCA (Ni)