CRC Extreme Duty Silicone Aerosol 300ml

High temperature, high pressure spray

CRC Extreme Duty Silicone is a premium grade silicone fluid with excellent lubrication and temperature viscosity characteristics. It leaves a thin, clear, odourless film that chemically reacts with metal surfaces to provide lubrication properties far superior than conventional silicone lubricants.

As Extreme Duty Silicone is a silicone lubricant, it will resist moisture in damp environments, providing long-lasting lubrication, and extreme temperature and pressure resistance. It's effective from -38 degreesC to +316 degreesC and can withstand 1200lbs (Falex Test).

Designed for high pressure and high temperature applications on metal and non-metal surfaces, CRC Extreme Duty Silicone reduces friction and galling even on metal-to-metal contact areas. Won't melt or freeze.

Uses:

• Ideal for use in precision instruments, vending machines, bearings in high ambient temperature applications, rolling and sliding mechanisms, plant conveyors, guides and rails, electric motors and rollers, clocks, rubber seals
• Mould release agent

CRC Extreme Duty Silicone Features:

• Superior lubricating properties - even in demanding conditions
• Clear, odourless, non-staining
• Resists moisture - stays in place in damp environments
• Extreme temperature and pressure range - effective from -38 degreesC to +316 degreesC
• Withstands 1200 lbs. Falex test
• Reduces friction and galling - eases metal-to-metal contact to prolong equipment life
• MPI Approved C12

CRC Extreme Duty Silicone Specifications:

Physical Properties

• Appearance: Clear, water-white liquid
• Odour: Mild solvent
• Propellant: Hydrocarbon
• Flash Point (Aerosol): <0 degreesC
• Flash Point (residual film): 316 degreesC
• Boiling Point: 80 degreesC initial
• Solubility: Negligible in water
• Specific Gravity: 0.87

Performance Characteristics

• Type of film: Thin clear film
• Dry time: 5 minutes
• Temperature Range: -38 degreesC to +316 degreesC
• Thermal Conductivity @ 24 degreesC: 0.088 BTU/FT/HR/ degreesF
• Dielectric Constant @ 100 cycles: 2.9
• Dielectric Strength (ASTM D-877): 230 Volts/mil
• Dissipation Factor @ 100 cycles: 0.0013
• Volume Resistivity: 8 x 1012 OHM/CM
• Pressure Range: 0-20,000 P.S.I.
• Falex Test: 1,200 P.S.I.