CRC Food Grade Chain Lubricant Aerosol 340g
Buy now, pay later & Finance Options
Find Local Store

Semi-Synthetic Food Grade Chain Lubricant With Foaming Action
CRC Food Grade Chain Lube is a special blend of mineral oil and synthetic additives, designed to keep roller drive and conveyor chains lubricated. Foaming action provides outstanding penetration and creeps deep between wire strands, chain links, pins, rollers and sprockets. As the foam subsides it leaves a lubricating non-drying film that remains in place and resists wash-off and sling-off. Specifically designed to provide the convenience of aerosol application where incidental food contact may occur. Regular use will help inhibit corrosion, reduce load stress and greatly extend chain life.
Temperature Range from -20 degreesC to +150 degreesC (continuous), +170 degreesC (intermittent). MPI Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact.
Features and Benefits
- Foaming action - For outstanding penetration and coverage. No messy overspray.
- Penetrates, lubricates, protects - Low viscosity formula creeps deep between wire strands, chain links, pins, rollers and sprockets
- Reduces friction and wear - Reduces load stress
- Corrosion protection - Lengthens chain and sprocket life
- For effective lubrication of all types of chain and conveyor systems - Particularly where incidental food contact may occur
- Silicone free - Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted.
- 360 degree valve - Aerosol can be sprayed from any position even upside down
- Non-toxic, odourless, tasteless
- Temperature Range - Effective from -20 degreesC to +150 degreesC (continuous), +170 degreesC (intermittent)
- MPI Approved C15
- NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact
- NSF H1 Registered for incidental food contact
Uses
- Recommended for use as a lubricant and corrosion inhibitor on conveyor chains, packaging equipment, hoist chains, link and roller assemblies, forklift trucks and many other industrial applications
Specifications:
Approvals
- NSF H1 Registered for incidental food contact
Physical Properties
Flash Point | >+300 degrees C (COC) |
---|---|
Solubility | Not in Water |
Odour | Mild |
% Volatile | 0 |
Appearance | Light amber clear liquid |
Specific Gravity | 0.874 |
Propellant | Hydrocarbon |
Performance Characteristics
Type of Film | Non-drying |
---|---|
Dry Time | Non-drying |
Temperature Range | -20 degrees C to +150 degrees C (continuous), +170 degrees C (intermittent) |
Dangerous Goods Shipping
This item is classified as a Dangerous Good and must be processed by a specialised courier. Please therefore allow an extra 1-7 days above the usual shipping time.Please note that Dangerous Goods delivery might not be possible if you live somewhere with alternative mail delivery such as a plane or ferry. Please confirm with your local courier if they can deliver Dangerous Goods.