Eternabond Eternaprime Surface Primer

#9112525
Warranty Badge - 12-Months
Hurry! 2 left in stock - Ready to Ship
ONLY $125.00

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

Click on the image above to view full picture

Details

Details

For surface preparation

Eternabond EternaPrime Surface Primer is an adhesive and surface conditioner intended to aid adhesion of Eternabond MicroSealant tapes, or other non- MicroSealant tapes such as butyl tapes and other self adhesive seaming tapes. EternaPrime is also an excellent primer for use with self-adhered modified bitumen membranes. Use EternaPrime when surfaces to be bonded are very dirty (oxidised and cannot be easily cleaned), or dusty (like on a tar and gravel roof). It will prepare the surface by coalescing all loose particles into a solid platform for the Eternabond tape to adhere to. EternaPrime allows Eternabond MicroSealant tapes to be installed in temperatures as low as -20°F (-29°C). It also prepares most contaminated surfaces for tape application.

Composition
EternaPrime is based on a VOC exempt solvent with a blend of Eternabond's elastomers and resins infused into the solvent.

Surface Preparation
Surface must be clean and dry. Remove heavy accumulations of loose rust and scale, dust, talc, and dirt. Oil and grease, and other contaminants should be removed with EternaClean or a non-residue cleaner. Do not use EternaPrime on PVC roofs as reactivation of some plasticisers may occur.

Eternabond EternaPrime Surface Primer Features:
  • Specially formulated primer developed specifically for EternaBond tapes
  • Based on a VOC exempt solvent, meets all federal standards for health and environmental safety
  • Developed for preparation of surfaces when installing EternaBond tapes in low ambient temperatures from 40° F down to -20° F
  • Can also be used as a coalescing agent on surfaces which have difficult to remove dirt or conditions which may encapsulate the EternaBond tape

Eternabond EternaPrime Surface Primer Specifications:
  • Application temperature: -20 degreesF to 205 degreesF
  • Coverage: 75 sq ft (6.9m) per 1 quart (950mls)
  • Drying Time at 60 degreesF: 15 minutes
  • Film Thickness: +/- 4 mils when wet
  • Flash Point: 110 degreesF
  • Standard Can Size: Quart (950ml)
  • Viscosity: 135 - 152 cps
  • Weight: 10 lbs per gallon
Warning: Not for use on PVC.

Products You Recently Viewed

Recently Viewed