Newmar TP Temperature Probe

Protect your charger from overheating

Your Phase Three charger is designed to utilize the Newmar TP Temperature Compensation Probe which provides automatic temperature compensation. The function of the probe is to signal the charger to fine-tune its output voltage so that it is properly optimized for the temperature of the battery or battery environment. Because low battery temperature increases resistance to charging and high battery temperature reduces impedance, requiring a lower charge voltage, the ideal charging voltage will vary depending on the temperature of the battery's environment when it is being charged.

Battery Over-temperature Shutdown
In the event that battery temperature becomes excessive the temperature probe will signal your charger to shut down (at approximately 50°C or 122°F probe temperature). When your battery cools sufficiently, the charger will automatically return to service.

Newmar TP Temperature Compensation Probe Features:

• Adjustment rate: approximately -5mV per cell per °C
  
• Battery Over-temperature Shutdown
  
• Compatible with: Newmar PT-32-30, PT-24-45F, and PT-24-95F
  
• Includes: 25' of cable, with a sensor at one end and a keyed five-pin plug at the other
  

Newmar TP Temperature Probe Installation Instructions