TruDesign Manual Aquavalve Y Valve White

The most versatile Y-valve on the market today

Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), you have the choice to divert black water to a holding tank or directly overboard when circumstances allow. The TruDesign Manual Aquavalve is designed for demanding marine sanitation applications. It's typically used in marine toilet applications where protection for the environment necessitates the need to control effluent discharge. The effluent can be held in a holding tank for later discharge overboard or to a shore side facility.

The TruDesign Aquavalve is moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability. The Aquavalve is a diverting valve. The rotor seal is designed to operate under low pressure, and therefore may not be suitable for vacuum toilets depending on the position of the valve relative to the toilet.

TruDesign Manual Aquavalve Features:

• Manufactured from a glass reinforced nylon composite: high strength and light weight
• Stainless steel fasteners: will not corrode in salt laden air
• Easy installation: with a range of straight, 90° and 120° tails, and two seal options, plumbing in confined spaces is made easy
• Handle position lockable: legislation in some regions require the overboard discharge handle to be locked into the holding tank position when in ‘no discharge’ zones
• Pressure tested: all valves are pressure tested to ensure quality and safety in respect to sealing and operation
• Silicon seal: the Aquavalve is the only valve on the market today with smooth movement and an excellent seal with good wear resistance
• Composite spanner included: avoids using pipe wrenches that gouge the fitting. Facilitates access in tight places
• Fascia plate on standard model can be removed to reveal simple “open - open - inlet” labeling - Where product is not used for marine toilets, all toilet references are removed
• Large operating temperature range - Suitable for all marine environments, from -40°C to +110°C
• Note bulkhead hole diameter for Aquavalve through Bulkhead is 49.0mm
• Colour: White