Powertech 10-Step Intelligent Lithium/Lead Acid Battery Charger 12/16/24VDC 26A

Keep batteries in peak working order

The high current Powertech 10-Step Intelligent Lead Acid and Lithium Battery Charger suits 12v or 24V lead acid, 16V AGM racing, 16V Lithium, or 12V LiFePO4 batteries between 30Ah to 200Ah. It has 10-step charging modes to ensure your battery is in tip-top condition, and safety features include overload, short circuit, reverse polarity, safety timer and wrong battery protection. An LCD screen with push button controls enables you to select the charging mode and see the charging status at a glance. The charger can also double as a DC power supply by providing 13.6V up to 5A. Supplied with fused lead with heavy-duty battery clips.

Step 1: Check
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.

Step 2: Recovery
Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current.

Step 3: Soft Start
Slow charge and protect for deeply discharged or sulfated (desulfation) batteries by multi -phase of current.

Step 4-7: Bulk
The Bulk charging process continues using both a High Rate and Medium Rate charge and returns 80% of battery capacity, Indicated by the 20%, 40%, 60%, 80% and 100% LCD.

Step 8: Absorption
Brings the charge level to 80%, The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.

Step 9: Analyse
Tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced.

Step 10: Maintenance
Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 12.8V (12V) and 25.6V (24V), the charger will start the Maintenance cycle until voltage reaches 13.6V (12V) and 27.2V (24V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.

Powertech 10-Step Intelligent Lead Acid and Lithium Battery Charger Features:

• 12V, 16V or 24VDC
• 10-step charging
• Lead acid, AGM, lithium and LiFePO4
• 13.6V 5A DC power supply option

Powertech 10-Step Intelligent Lead Acid and Lithium Battery Charger Specifications:

• Charging Voltage:
• Lead acid: 14.7V/29.4VDC
• Cold/AGM: 14.8V/29.6VDC
• 16V AGM racing: 19.6VDC
• 16V lithium: 19.45VDC
• LiFePO4: 12.8V/4 cells 30Ah-200Ah
• Charging Current: Lead Acid: 12V 26A, 24V 13A
• Ingress Rating: IP20

What's in the box:

• MB3912 Charger
• Clamps cable
• Eyelet M10 cable
• Instruction manual