Projecta Charge N Maintain 4-Stage Automatic Battery Charger 12V 0.8A

Recharge the smart and efficient way

The new and improved Projecta Charge N Maintain 4-Stage Automatic Battery Charger is perfectly suited to the DIY'er. No-fuss options mean you can simply hook them up and the charger will do the rest. The Charge N' Maintain range provides a safe and practical method for charging all your automotive and marine batteries.

The Smart Charger technology offers switchable charging stages that ensure an accurate and efficient charge for your battery. This allows longer life and better performance for your battery over extended periods of time.

The Projecta Charge N Maintain 4-Stage Automatic Battery Charger communicates with the battery and ascertains its level of charge. This allows the charger to balance its load and optimise its charging methods to ensure charging is stopped when the battery reaches capacity.

Lightweight and Compact
Switch Mode Technology converts 240V power to 12V DC using electric components, unlike traditional chargers with heavy transformers.

Safe and Easy to Use
The Charge N' Maintain range are spark-free and are protected against accidental reverse connection significantly increasing safety. They are safe to use while the battery is still in the vehicle; simply connect and forget. The chargers are IP65 rated ensuring they're reliably weatherproof.

Easy-to-read Status Indicators and Adjustable Output
The colour code charge indicators show POWER on, CHARGING and FULLY CHARGED. Output is adjusted to suit different battery sizes for optimum charging. Interchangeable fused wiring harness for permanent installation.

Projecta Charge N Maintain 4-Stage Automatic Battery Charger Features:

• Switch Mode Technology
• Converts 240V to 12V DC
• Uses electric components unlike traditional chargers with heavy transformers
• Spark-free
• Protected against accidental reverse connection
• IP65 rated
• Safe to use while the battery is still in the vehicle
• Adjustable output for optimum charging
• Inter-changeable fused wiring harness for permanent installation

Projecta Charge N Maintain 4-Stage Automatic Battery Charger Specifications:

• Nominal input: 100VAC-240VAC, 50-60HZ
• Input power: 17W
• Output voltage: 12V
• Output current: 0.8A
• Battery Voltage Drops Below A Set Voltage Restarts Bulk: 12.0V
• IP rating: IP65
• Charging stages: 4
  
  • 1A. Battery Health Check: 0.8A UP TO 10.0V
  • 1B. Stop Charging: If battery voltage has not reached 10.0V within 2 hours Stage 1, stop charging. Set error
  • 2A. Bulk: 0.8A to 14.4V
  • 2B. Bulk Timeout, Display F4, Stop Charging: 22 HOURS plus or minus 10%
  • 3. Absorption Voltage Hold For 30 Mins Transit To Float: 14.4V
  • 4. Float Voltage Max Voltage Is 13.5V For 2 Min Or Current <0.3A, Then Off For 3 Min. Repeat: 13.5V for 2 mins or <0.3A then 2 mins rest, repeat

Projecta Charge N Maintain 4-Stage Automatic Battery Charger Product Manual