RELiON 12V 100AH DIN-HP LiFePO4 Battery
RELiON 12V 100AH DIN-HP LiFePO4 Battery
Buy now, pay later & Finance Options
Find Local Store
This high-performance 12V DIN 100Ah lithium iron phosphate battery is part of the RELiON HP Series (High Peak Performance) of batteries. It is a safer, a more lightweight alternative to lead-acid in various marine applications.
At 30 lbs, this battery is less than half the weight of the lead-acid or AGM equivalent, helping to fight against the drag caused by heavier options. It maintains consistent power and is equipped with handles for carrying, an M8 terminal type and a built-in battery management system (BMS).
All RELiON LiFePO4 batteries have installation flexibility, fast-charging capabilities and are maintenance free.
PRODUCT SPECIFICATIONS
- Voltage: 12.8V
- Amp Hours: 100Ah
DIMENSIONS and WEIGHT
- Length: 13.2 in (335 mm)
- Width: 6.9 in (174 mm)
- Height: 7.5 in (191 mm)
- Weight: 30.2 lbs (13.7 kg)
APPLICATIONS
- Marine
Electrical Specifications | |
|---|---|
| Nominal Voltage | 12.8 V |
| Nominal Capacity | 100 Ah |
| Capacity @ 25A | 240 min |
| Energy | 1280 Wh |
| Resistance | ?30 mohms @ 50% SOC |
| Efficiency | 99% |
| Self Discharge | <3% per Month |
| Maximum Modules in Series | 1 (Single Use) |
Mechanical Specifications | |
|---|---|
| Dimensions (L x W x H) | 13.2 x 6.9 x 7.5' 335 x 174 x 191 mm |
| Weight | 30.2 lbs (13.7 kg) |
| Terminal Type | M8 x 1.25 |
| Terminal Torque | 80 - 100 in-lbs (9 - 11 N-m) |
| Case Material | ABS |
| Enclosure Protection | IP66 |
| Cell Type - Chemistry | Cylindrical LiFePO4 |
Discharge Specifications | |
|---|---|
| Maximum Continuous Discharge Current | 100 A |
| Peak Discharge Current | 800 A (2 s) |
| BMS Discharge Current Cut-Off | 1000 A plus or minus 100 A (2.2 plus or minus 1 ms) |
| Recommended Low Voltage Disconnect | 11 V |
| BMS Discharge Voltage Cut-Off | 9.2 V (2.3 plus or minus 0.08 vpc) (4.2 plus or minus 0.5 s) |
| Reconnect Voltage | 10 V (2.5 plus or minus 0.1 vpc) |
| Short Circuit Protection | 200-600 micros |
Charge Specifications | |
|---|---|
| Recommended Charge Current | 5 A - 50 A |
| Maximum Charge Current | 100 A |
| Charge Current 32 degreesF to 14 degreesF (0 to -10 degreesC) | ?0.1 C |
| Charge Current 14 degreesF to -4 degreesF (-10 to -20 degreesC) | ?0.05 C |
| Recommended Charge Voltage | 14.2 V - 14.6 V |
| BMS Charge Voltage Cut-Off | 15.4 V (3.85 plus or minus 0.025 vpc) |
| (1 plus or minus 0.2 s) | |
| Reconnect Voltage | 14.6 V (3.65 plus or minus 0.05 vpc) |
| Balancing Voltage | 14.4 V (3.6 plus or minus 0.025 vpc) |
Temperature Specifications | |
|---|---|
| Discharge Temperature | -4 to 140 degrees F (-20 to 60 degrees C) |
| Charge Temperature | -4 to 113 degrees F (-20 to 45 degrees C) |
| Storage Temperature | 23 to 95 degrees F (-5 to 35 degrees C) |
| BMS High Temperature Cut-Off | 176 degrees F (80 degrees C) |
| Reconnect Temperature | 122 degrees F (50 degrees C) |
| Refer to charge currents below 32 degreesF (0 degreesC) |
Compliance Specifications | |
|---|---|
| Certifications | CE (battery) |
| UN38.3 (battery) | |
| UL1642 and IEC62133 (cells) | |
| Shipping Classification | UN 3480, CLASS 9 |