CruzPro AM60 Rudder Angle Indicator

The AM-60 provides an accurate single sensor rudder angle indicator. Rudder angle is displayed in full units between -90 and +90 degrees. Separate alarm limits can be set for port and starboard. When activated, the built-in 85 dB alarm will sound and the display will flash.

The AM-60 provides for sender calibration and zero (rudder center) set.

The rudder angle is output on a NMEA 0183 compatible serial data line. This ASCII information can be used to log performance or repeat the information at a remote location.

Five levels of backlighting can be selected for night-time viewing and all set-up, calibration constants and alarm values are saved to non-volatile memory.

The AM-60 can be operated from a 9.5 to 33.0 VDC power supply.

The AM60 works with all standard rudder angle sensors and can be connected as either a master or slave.

• Operating Voltage: 9.5 - 33.0 VDC.
• Current Drain: 0.030 amps nominal.
• Operating Temperature: 32 to 122 deg F (0 to 50 C)
• Display: 4 digit LCD, 5 levels of backlighting.
• Data: Rudder Angle: -90 to +90 degrees Port and Starboard. Connect as Master or Slave. NMEA 0183 serial data output. Standard $IIRSA sentence.
• Alarms: Independent Port and Starboard built-in 85 dB audible alarms for excess rudder angle. Programmable External Alarm output.
• Size: 2.5'' dia X 4.1'' deep (61mm x 104mm)
• Mounting: 2-1/8'' (55mm) round hole.