Particularly on larger boats, owners often wish to
install deluxe sanitary ware of their preferred style and colour;
just like at home. In order to fulfil this requirement, VETUS has
developed the Sani-Processor, with an electric macerator and a
pump, so that an ordinary domestic toilet may be used on board.
The Sani-Processor can be easily connected to a standard toilet, by
means of 102 mm diameter hose (with a minimum fall of 50 mm per
metre). When the toilet is flushed, the Sani-Processor will collect
the contents, macerate them and pump the resultant slurry into a
holding tank or directly overboard, through a hose of only 19 mm
diameter. The whole process takes between 10 and 30 seconds and
works almost silently. In the unlikely event of a blockage, the
unit can be easily cleaned by removing the inspection lid. The
connecting hoses must be odour-tight andVETUS recommend the use of
VETUS sanitary hose, type SAHOSE19.
TECHNICAL SPECIFICATIONS
120 Volt / 60 Hz.
Macerator diameter: 98 mm
Nominal power consumption: approx. 580 W.
Dimensions: 420 x 120 x 360 mm (l x w x h)
Hose from toilet to Sani-Processor: 102 mm, maximum length 4
metres.
Hose from Sani-Processor to holding tank: 19 mm, maximum length
20 metres.
The holding tank may be maximum 4 metres higher than the
Sani-Processor
Washbasin/bidet connections: 40 mm
Weight: 4.8 kg
Pump capacity: approx. 50 l/min at 4 m head.
We work really hard EVERY DAY to ensure you get the best prices you'll find. IF you find the SAME product elsewhere tell us, and we'll match OR do better ;-)