Seaflo 13B Series Electronic Sensing Automatic Bilge Pump 2000GPH 12V

Keep your boat dry and safe

The innovative Seaflo 13B Series Electronic Sensing Automatic Bilge Pump offers water evacuation without the need for an extra float switch, making it a convenient and reliable choice for any boat owner. Its electronic sensing technology ensures efficient water removal by turning the pump impeller every 2-1/2 minutes for approximately 0.5 second to check for water presence. If water is detected, the pump will continue to run until all water is removed, providing constant monitoring and protection against flooding.

With a new split quick-connect joint design, replacing the pump is quick and easy. Simply swap out the motor without the need to disconnect the base or plumbing, saving you time and hassle. The pump also features Anti-Airlock protection and exclusive moisture-tight seals, ensuring reliable performance in any marine environment.

Constructed with marine-grade materials and featuring blocked wiring, the SEAFLO Bilge Pump is built to withstand the rigours of boating and provide long-lasting durability. Trust Seaflo 13B Series Electronic Sensing Automatic Bilge Pump to keep your boat dry and your mind at ease on the water.

Seaflo 13B Series Electronic Sensing Automatic Bilge Pump Features:

• Compact automatic pump - no float switch needed
• Checks for water every 2.5 minutes, runs for a half second
• Back up feature: prevents continuous running if sensor is fouled by debris
• Consumes 0.25amps per day
• CE, RoHS, ISO 8846, ISO8849 standards
• Submersible and ignition protected
• High efficiency, low amp motor, quiet operation
• Stainless-steel motor shaft
• Vented impeller housing to prevent the pump from becoming airlocked
• Marine grade silicon blocked, tin coated wiring
• Backflow prevention: includes non-return check valve to prevent water back flow
• Includes removable discharge straight fitting
• Innovative split quick-connect joint design removes and installs in seconds
• No need to disconnect base or plumbing when replacing pump
• Motor can be purchased separately
• Exclusive moisture tight seals
• Threaded discharge: easier installation and maintenance

Seaflo 13B Series Electronic Sensing Automatic Bilge Pump Specifications:

• Model: SFBP1-G2000-13B
• Motor model: SFMA1-G2000-13B
• Flow rate: 2000GPH
• Volts: 12V
• Current: 7.5A
• Head: 5.5m (18.04ft)
• Outlet diameter: 1-1/8" (29mm)