Simrad / Lowrance S5100 CHIRP Sounder Module

High resolution sonar coverage

The high-performance Simrad / Lowrance S5100 CHIRP Sounder Module features 3 fully independent channels able to deliver high-resolution CHIRP sonar coverage across multiple depth ranges, precision-focused for your offshore sportfishing needs. Mix and match up to three transducers to provide the perfect coverage for any fishing style. Detect small or tightly grouped fish, identify thermoclines, and target specific depths with ease.

Up to 3 Transducers for Ultimate Visibility
The S5100 is the first sounder module to feature 3 fully independent sonar channels, delivering true simultaneous coverage of up to 3 different depth ranges with uncompromising performance at every range. Connect 3 single-channel transducers, or pair one dual-channel and one single-channel, to create the perfect sonar coverage for the areas you fish and the species you target.

Sharper Target Resolution, Wider Coverage
CHIRP technology uses frequency-swept pulses to provide improved target resolution and noise rejection compared to traditional single-frequency sonar. With the S5100’s advanced CHIRP technology, you’ll see clear to the bottom with no mid-water noise or clutter. The S5100 is also compatible with Airmar’s wide‐angle CHIRP transducers; these deliver enhanced coverage of the upper water column, and are a perfect fit for targeting pelagic species. Wide-angle transducers are also useful in shallow water, where traditional narrow beam angles can provide limited bottom coverage. A wider coverage area not only speeds your search, but means individual fish targets are easier to see.

Plug-and-Play Display Compatibility
The S5100 can be used to add sonar capabilities to a modular Simrad display system, or to provide additional sonar capabilities on multifunction displays or fish finders with built-in sounder technology. High-speed Ethernet connectivity enables easy installation almost anywhere on board, on vessels of any size.

Note: Simrad and Lowrance are the same company and all electronics are compatible networking with each other. Compatible with Lowrance HDS Gen3 onwards

Simrad / Lowrance S5100 CHIRP Sounder Module Features:

• 3 fully independent sonar channels deliver high-resolution coverage
• Noise-free clarity at all depth ranges
• Combine any 3 frequency ranges to target multiple depths
• Compatible with wide-angle transducers for greater coverage
• Simultaneous split-screen viewing of multiple depth ranges
• Maximum depth of 3,000 metres / 10,000 feet (transducer dependent)
• Plug-and-play 9-pin transducer connectors for easy installation
• Compatible with Lowrance HDS Gen3 onwards

Simrad / Lowrance S5100 CHIRP Sounder Module Specifications:
Approvals:

• Compliance: EMC directive 2014/30/EU
• Standard: IEC 60945

Connectivity:

• Transducer: 3 x 9-pin sonar connectors
• Ethernet: 1 x 100 Mbps
• Power: 1 x 4-pins power connector

Electrical:

• Supply voltage - Operating 9-32 V DC
• Supply voltage - OFF to ON 10.4 - 31.2 V DC
• Power consumption - Max 85 W
• Recommended fuse rating 7.5 A

Environmental:

• Operating temperature range: -15°C - +55°C (5°F - 131°F)
• Storage temperature: -30°C - +70°C (-22°F - 158°F)
• Waterproof rating: IPx5
• Humidity: Up to 95% at 35°C (95°F) non-condensing
• Shock and vibration: Acc to IEC 60945

Physical:

• Dimensions (W x H x D): 340 x 100 x 250 mm excluding connectors (378 mm D including connectors)
• Weight: 4.7 kg (10.4 lbs)
• Compass Safe Distance: 1.8 m (6 ft)

Sonar specification:

• Power output: 600 W - 3 kW RMS (dependent on transducer)
• Frequencies 25 - 250 kHz
• Transmitter and receiver type:
  3 tuned CHIRP transmitters
  3 Broadband tuned receivers