CruzPro CC-10 Pulse Width Modulated Charge Regulator 6A 12VDC

No frills, low cost charge controller

The CruzPro CC-10 Pulse Width Modulated Charge Regulator is a voltage regulator that senses battery voltage and adjusts the regulation to deliver a fixed 13.6 VDC or 27.2 VDC float voltage (depending on model) from your solar panels or dumb battery charger. The CC10 enables you to leave your charging source connected permanently without fear of damaging overcharges or excess electrolyte loss. You are assured you have a fully charged battery whenever you need it.

The CC10 is a true Pulse Width Modulated (PWM) charger that keeps the battery voltage at the prescribed charging voltage regardless of the load current. The CC10 maintains a fixed charging voltage to 13.6 VDC or 27.2 VDC (depending on model) and maintains that float voltage for maximum battery life.

CruzPro CC-10 Pulse Width Modulated Charge Regulator Features:

• True Pulse Width Modulated (PWM) charger keeps the battery voltage at the prescribed charging voltage regardless of the load current
• Maintains a fixed charging voltage to 13.6 VDC or 27.2 VDC (depending on model) and maintains that float voltage for maximum battery life

CruzPro CC-10 Pulse Width Modulated Charge Regulator Specifications:

• Input Charge Voltage: 7.5 to 42 VDC (Unloaded), 6 amps max
• Battery Voltage/Current Drain: 13.6 or 27.2 VDC nominal, 0.012 amps typical average current drain
• Operating temperature: 0 to 50 deg Celsius ( 32 to 122 deg Fahrenheit)
• Size: 100 x 60 x 30 mm (4 x 2.4 x 1.2 inch)
• Regulated Output Voltage: PWM Float Regulation Voltage 13.6 (or 27.2) VDC
• Accuracy, 0 to 50 deg C: Better than +/-0.10 VDC

Product Manual