International Bilgekote Grey 1L

Hard-wearing protection for your bilges

International Bilgekote Grey 1L isn't your run of the mill topcoat. It's a hard-wearing, chemically resistant quick-dry enamel for your bilges, lockers and bulkheads. It protects bilge areas against moisture penetration, wear and tear, and helps resist oil and fuel spillage. Not only does it help prevent the absorption of oil, gasoline and sludge into the substrate, but it will help you clean bilge areas easily once applied. International Bilgekote Grey 1L is made with high opacity for a very thorough coverage with a high sheen finish and can be used on wood, aluminium, steel and glass-fibre reinforced plastic (GRP).

Rest easy knowing your bilges are well-protected when you use International Bilgekote Grey 1L.

International Bilgekote Grey 1L Features:

• Hard-wearing enamel coating for bilges, lockers and bulkheads
  
• Helps prevent absorption of oil, gasoline and sludge into substrate
  
• High opacity for thorough coverage
  
• High sheen finish
  
• Can be used on wood, aluminum, steel, and GRP

International Bilgekote Grey 1L Specifications:

• Quantity: 1 litre
  
• Application method: Brush and roller (spray for professional use only)
  
• Practical coverage:
  
  • Brush: 11m²/litre
    
  • Spray: 7.38m²/litre
  
  
• Number of coats: 1-2 coats
  
• Recommended dry and wet film thickness (DFT/WFT):
  
  • 40 microns dry (per coat)
    
  • 83 microns wet (per coat)
  
  
• Cleaner/Thinner: Thinner No.1 (For spraying, thin approximately 20% with Thinner No.10
  
• Shelf Life: 2 years

Bilgekote Product Information Sheet
Bilgekote Specs Sheet