Trojan Duratorque Full 9in Drum Straight Beam Axle 1500kg

The item you're looking at is currently unavailable or has limited stock, how about this one instead?

Trailparts Marine Hub Seal 2500kg 6697 - Trailparts

Why pay $46.89

ONLY $29.99

SAVE $16.90!

Details

Details

Duratorque is a superior suspension system that is suitable for fitment to and use on all types of trailers. Using specially formulated rubber cords as a springing medium, Duratorques are totally self-contained and easily fitted to the trailer chassis. Because the two sides are not connected, each wheel is independently sprung.

All Duratorque components are either galvanised or electro zinc plated for protection against corrosion.

From July 2011, 1000kg to 1750kg versions are fitted with a bolt in replaceable stub  axle.

SINGLE AXLE OR TANDEM.

If Tandem then the carrying capacity of each Duratorque is to be reduced by 25%

Carrying capacities for duratorques are 1000kg, 1500kg, 1750kg to 2200kg in  both  two  piece  and  full  beam  types and 3000kg version in full and drop beam. These capacities are for single axle applications. When mounted in tandem the capacity must be reduced by 25% i.e. two 1500kgfull beam duratorques  will  carry  2250kg.  Note that duratorque half axles are each labeled with the total capacity per pair, not each  side.

All duratorques are able to be fitted with non braked or braked hubs. These brakes can be hydraulic disc, 1500kg, 1750kg, 2200kg and 3000kg capacities or Electric drum brakes in 1500kg, 1750kg and 2200kg capacities and hydraulic drum brakes in 1250kg capacity.

It is recommended  that  Duratorques be  mounted to  the trailer with the swing arms  trailing. When  mounted  in tandem the distance between the tyres be kept to a minimum and should not exceed 150mm. The distance between the top of the tyres and the mudguards when  the Duratorques are new and unloaded should be at least 120mm. When mounted in tandem the front axle should be braked.

 When ordering full beam Duratorques remember to supply your required length measurement A and B as shown in the diagram below.

 

Specifications:

The following table details the minimum measurements from hub face to spring / bracket mounting center.

Fig	Model Type:	1000kg, 1500kg, 1750kg	2200kg	3000kg
A	Two Piece	220mm	210mm	N/A
	Two Piece Retro	200mm	N/A	N/A
B	Two Piece	340 - 440mm	340 - 440mm	N/A
C	All Disc	163mm	165mm	165mm
	Hyd Drum	80mm	N/A	N/A
	Elec Drum 10'	95mm	N/A	N/A
	Elec Drum 12'	N/A	N/A	N/A
D	All	60mm	60mm	25mm
E	All	30mm	30mm	30mm
F	All	145mm	125mm	145mm

 

Part No:	Capacity:	Hub Type:
T101040	1000kg	Non braked and disc braked
T101044	1500kg	Non braked and disc braked
T101056	1500kg	Hydraulic drum braked
T101058	1500kg	Electric drum braked
T101059	1750kg	Electric drum braked
T101052	2200kg	Non Braked hubs and disc braked

Bulk Items Shipping

This item is classified as a Bulk item and must be processed by a specialised courier.
Please therefore allow an extra 1-7 days above the usual shipping time.

Shipping Rates for Bulk Items