Trojan Galvanised Straight Beam Axle 3000kg

The item you're looking at is currently unavailable or has limited stock, how about this one instead?

Trojan Grease Cap 1.980in 50.2mm

ONLY $7.99

Details

Details

Trojan manufactures a wide range of beam axles to suit most applications. These axles are for use with leaf spring suspensions and include straight beam, drop beam and gull wing types. Braked and non braked types are available. All axles can be supplied either galvanised or in bare metal form. Depending on the capacity, axle beams are manufactured using either 40mm, 50mm or 65mm square hollow box section.

Beam axles are manufactured against firm order only and are built to your specifications.

Measurements A and B are required. The face to face measurement (A) is the measurement from the outside face of one hub to the opposite one. Measurement (B) is measured from the center to center of the springs mounted position.

Specifications:

Part No:	Capacity:	Hub Type:	Beam Size:	Finish
T020095	1200kg	Hyd 9 inch	50 x 50 RHS	Bare Metal
T020097	1500kg	10 inch Drum	50 x 50 RHS	Bare Metal
T010100	1500kg	Non braked	50 x 50 RHS	Bare Metal
T010102	1500kg	Non braked	50 x 50 RHS	Galvanised
T020100	1500kg	Disk braked	50 x 50 RHS	Bare Metal
T020101	1500kg	Disk braked	50 x 50 RHS	Galvanised
T020090	1750kg	10 inch electric	50 x 50 RHS	Galvanised
T020112	2000kg	Multi-hub	65 x 65 RHS	Bare Metal
T020113	2000kg	Multi-hub	65 x 65 RHS	Galvanised
T020127	3000kg	Multi-hub	65 x 65 RHS	Bare Metal
T020129	3000kg	Multi-hub	65 x 65 RHS	Galvanised

Bulk Items Shipping

This item is classified as a Bulk item and must be processed by a specialised courier.
Please therefore allow an extra 1-7 days above the usual shipping time.

Shipping Rates for Bulk Items