Icom IC-M410BB Fixed-Mount Marine VHF Transceiver with DSC

Control all communications on the water

The Icom IC-M410BB Fixed-Mount Marine VHF Transceiver provides VHF communications for vessels with limited helm space. This fixed-mount marine transceiver consists of a CommandMic and black box RF unit. The supplied CommandMic controls the radio for essential communications on the water including DSC. Install the RF unit out-of-sight and place it away from the CommandMic.

CommandMic Stations
Add an additional CommandMic to extend communication points for boats requiring a second comms station. This is ideal for boats needing communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat.

Class D DSC Function
On the back of every CommandMic is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel.

NMEA 2000 and NMEA 0183-HS
The NMEA 2000 network provides plug-and-play data communication to interconnect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.

Loud One-Way RX Hailer
The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.

Active Noise Cancelling
The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.

Icom IC-M410BB Fixed-Mount Marine VHF Transceiver Features:

• Excellent for boats with limited helm space
• Includes CommandMic and black box RF unit
• IPX7 waterproof, 1 m depth water for 30 minutes
• AquaQuake function
• External speaker connection from the CommandMic cable
• Anchor Watch function
• Class D DSC
• NMEA 2000 and NMEA 0183-HS
• Loud one-way RX hailer
• Active noise cancelling

Icom IC-M410BB Fixed-Mount Marine VHF Transceiver Specifications:

General

• Version: EUR
• Frequency range:
  
  • TX: 156.025~161.425 MHz
  • RX: 156.050~162.000 MHz | (156.500 ~ 162.025 MHz for China)
  • DSC: 156.525 MHz
• Usable channels: INT, USA, ATIS channels
• Type of emission: 16K0G3E (FM), 16K0G2B (DSC)
• Power supply management: 12.0 V DC (10.8~15.6 V DC)
• Current drain (at 13.8 V DC):
  
  • TX 25 W output: 5.5 A Max.
  • RX Max. Audio: 1.5 A (One CommandMic) | 4.0 A (Two CommandMic & RX hailer)
• Operating temperature range: –20°C ~ +60°C; –4°F ~ +140°F
• Antenna impedance: 50 Ω
• Dimensions (W x H x D, Projections are not included):
  
  • RF unit: 216 x 79 x 113 mm
  • CommandMic: 67.5 x 144.5 x 37 mm
• Weight: 870 g (RF unit), 400g (CommandMic)
• Ingress protection standard: IPX7 Waterproof (Except for the DC power connector, NMEA In/Out leads and AF Out lead)

Transmitter

• Output power: 25 W, 1W
• Max. frequency deviation: ±5 kHz
• Frequency tolerance: ±0.5 kHz
• Spurious emissions: Less than 0.25 μW
• Residual modulation: More than 40 dB
• Adjacent channel power: More than 70 dB

Receiver

• Sensitivity:
  
  • FM: Less than -2 dBμ emf (at 20 dB SINAD)
  • DSC (1% BER): -7 dBμ emf typical
• Adjacent channel selectivity:
  
  • FM: More than 70 dB
  • DSC (1% BER): More than 73 dBμ emf
• Spurious response:
  
  • FM: More than 70 dB
  • DSC (1% BER): More than 73 dBμ emf
• Intermodulation:
  
  • FM: More than 68 dB
  • DSC (1% BER): More than 68 dBμ emf
• Hum and noise: More than 40 dB
• Audio output power:
  
  • CommandMic: More than 2 W (with 4 Ω load, at 10% distortion)
  • Rx hailer: More than 13 W (with 4 Ω load)