Gear up and go

This Week's Deals Expire In:

00 Hours 00 Minutes 00 Seconds
Your Currency
Up (Water Heaters) ▲

Athanor Portable Gas Water Heater Califont 6LPM

#9152408
Warranty Badge - 12-Months
In Stock - Ready to Ship
Why pay $320.72
ONLY $239.00
SAVE $81.72!

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

💬 Report incorrect product information

Athanor Portable Gas Water Heater Califont 6LPM

Click on the image above to view full picture

More Views

Details

Details

Enjoy hot water anywhere

The Athanor Portable Gas Water Heater Califont makes cleaning up after a day's adventure in the outdoors a breeze. Featuring adjustable temperature, water flow, and showerhead ideal for showering, washing the dishes, and removing mud or saltwater from your equipment. To operate, simply connect to your water source and LPG gas cylinder, and open the showerhead to activate the heater. Water will heat to your desired temperature up to 45°C, which is shown on the LED display. Safety features include a temperature sensor to stop the water temp from exceeding 50°C, and a water flow sensor that only enables the burner to work when water is flowing.

Athanor Portable Gas Water Heater Califont Features:
  • Outdoor use
  • Powered by LPG Gas
  • LED Temperature Display
  • Easy to set up
  • Adjustable temperature and water flow
  • Heats to a maximum of 50°C
  • Shower head supplied
  • Hanging kit with mounting hardware included
  • Hangs upright
  • 2 x standard D cell batteries are required
  • Gas bottle compatible
  • Comes with mounting kit for permanent/temporary mounting on wall
  • Comes with gas regulator

Athanor Portable Gas Water Heater Califont Specifications:
  • Gas Input: 1/2” Connection (with pre-fitted adaptor)
  • Gas Pressure: 2.8kPa
  • Approval: GMK10498
  • Max. Water Temperature: 50°C (+/-3°C)
  • Water Connection: 1/2” (input/output)
  • Water Pressure: 0.02MPa (min), 1.0MPa (max)
  • Flow rate: 6 LPM (Litres Per Minute)
  • Dimensions: 440 x 300 x 130mm
Matching Water Flow and Demand to Califont Size:

It is important to select the size of the califont to match the existing water pressure and the demand. A large califont on a low-pressure supply will not be able to supply water at the pressure indicated on the califont. Conversely, a small califont with too much incoming water pressure will not be able to keep up with heating.

To ensure the match, you need to measure your available water pressure before installing the califont. You might be able to utilise a pressure-reducing valve to reduce pressure or a pump to increase pressure. Generally, a 20-40psi water pressure is recommended for small capacity califont (10L and below) and up to 70 psi for our 12L and 16L.


Please Note - Installation:

It is very important to understand that only califonts installed per the manufacturer's instructions by a qualified installer will be warrantable. Additionally, installing them in other ways may cause a risk of fire and explosion. This may also void your insurance.

Specifically, changing the electrical wiring system, potentially creating a spark and ignition risk near where the gas piping system is going into the unit, creates the potential for a fire if there is any gas leak. If you have an installer wanting to change anything from standard, please ensure they are qualified to do so and prepared to warranty and back up their work should something go wrong.


Please note that actual product may vary from photo provided by supplier.


Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.

Products You Recently Viewed

Recently Viewed