Jabsco PAR-Max HD4 Water Pressure System Pump 12VDC 15LPM 40PSI

Smoother and more efficient than ever

The new and improved Jabsco PAR-Max HD4 Water Pressure System Pump takes inspiration from the previous version and enhances its capabilities even further. Continuing Jabsco’s dedication to producing top-quality products, this robust water pressure system pump features a heavy-duty motor that’s protected by an automatic thermal overload cut-out for enhanced longevity. The multi-diaphragm design self-primes to 1.5m vertical lift and can run dry without damage.

The bypass feature ensures smooth and quiet flow, while the integrated pressure switch allows for on-demand operation. Get the smooth, constant flow of pressurised water without the added noise. Grab and install your very own Jabsco PAR-Max HD4 Water Pressure System Pump today!

Jabsco PAR-Max HD4 Water Pressure System Pump Features:

• Efficient, high-flow, self-priming pump serving 2 or more outlets
• Multi-diaphragm design self primes to 1.5m vertical lift
• Can run dry without damage
• Motor protected by automatic thermal overload cut-out to prevent overheating
• Integrated, sealed pressure switch
• Supplied with snap-in ports for hose 1/2in (13mm) and strainer

Jabsco PAR-Max HD4 Water Pressure System Pump Specifications

General

• Part number: Q401J-115S-3A
• Application: Marine water pressure system
• Ambient temp range: 32 - 140F (0 - 60C)
• IP rating: IPX6
• Packed dimensions: 394 x 152 x 140mm
• Weight: 2.5kg

Materials

• Upper housing: Fibre reinforced polypropylene
• Lower housing: Cast aluminium
• Check valve retainer: Polypropylene
• Diaphragm: Santoprene
• Check valves: EPDM
• Switch diaphragm: EPDM
• Byprass diaphragm: EPDM
• PH seals: EPDM
• PH fasteners: Stainless steel
• Baseplate: Plastic with rubber feet
• Motor casing: Cast aluminium, coated steel

Hydraulic Performance

• Open flowrate: 15.1 LPM / 4 GPM
• Pressure switch cut-off: 40 PSI (2.8 BAR)
• Max operating pressure: 40 PSI (2.8 BAR)
• Max inlet pressure: 30 PSI (2.1 BAR)
• Internal bypass: Yes
• Fluid temperature range: 32 - 140F (0 - 60C)
• Self-Priming capability: Up to 8ft (2.4m) dry prime
• Run-dry capable: Yes

Electrical Performance

• Nominal voltage: 12VDC
• Voltage range: 9 - 13VDC
• Max current draw: 10A @ 40 PSI (2.8 BAR)
• Fuse size: 15A (not included)
• Duty cycle: Intermittent
• Leads: 12in (305mm), 14 AWG (2.5mm^2)
• Wire connection: Stripped wire

Compliance

• CE: Yes
• RCM: Yes
• ISO 8846 ignition protected: Yes