West System Mixed 105 Epoxy Resin and 205 Fast Hardener 4.8L

The item you're looking at is currently unavailable or has limited stock, how about this one instead?

West System 205 Fast Hardener 200ml

Why pay $35.00

ONLY $22.99

SAVE $12.01!

Details

Details

Rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties

The West System Mixed 105 Epoxy Resin and 205 Fast Hardener is a mix of five parts 105 Epoxy Resin to one-part 205 Fast Hardener that cures into a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.

West System 105 Epoxy Resin
The West System 105 Epoxy Resin is a clear, low-viscosity liquid epoxy resin. It can be cured in a wide temperature range to form a high-strength solid bond with excellent moisture resistance. When mixed at the proper ratio with a WEST SYSTEM hardener, it's an excellent adhesive. Formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinyl ester resins.

West System 205 Fast Hardener
The West System 205 Fast Hardener is a medium-viscosity epoxy curing agent. 205 is used in a majority of situations such as general Bonding, fabric application and barrier coating, It is formulated to perform at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. The mix ratio is 5 parts resin to 1 part hardener by volume. Not intended for clear coating.

West System 105 Epoxy Resin is designed to wet out and bond to:

• Wood bonding
• Fibreglass
• Reinforcing fabrics
• Composite materials
• Variety of metals

West System 105 Epoxy Resin Project Uses:

• Marine
• Boat Repair
• Adhesion
• Fabrication
• Moulding
• Furniture
• Casting

West System 105 Epoxy Resin Compatible Hardeners:

Compatible Hardener	Working time (thin film) at 72°F (22°C)	Minimum recommended temperatures
205 Fast Hardener	60 to 70 minutes	40°F (4°C)
206 Slow Hardener	90-110 minutes	60°F (16°C)
207 Special Clear Hardener	100-200 minutes	60°F (16°C)
209 Extra Slow Hardener	3-4 hours	70˚F (21˚C)

West System 205 Fast Hardener Project Uses:

• Marine
• Boat Repair
• Bonding
• Fabrication
• Barrier Coating

West System 205 Fast Hardener Cure Time:

• Pot life (100 grams cupful): At 72°F (22°C): 9 to 12 minutes
• Working time (thin film): At 72°F (22°C): 60 to 70 minutes
• Solid state: At 72°F (22°C): 6 to 8 hours

West System 105 Epoxy Resin Safety Datasheet

West System 105 Epoxy Resin Technical Datasheet

West System 105 Epoxy Resin User Manual and Product Guides

West System 205 Fast Hardener Safety Datasheet

West System 205 Fast Hardener Technical Datasheet

West System 205 Fast Hardener User Manual and Product Guides

Dangerous Goods Shipping

This item is classified as a Dangerous Good and must be processed by a specialised courier. Please therefore allow an extra 1-7 days above the usual shipping time.

Please note that Dangerous Goods delivery might not be possible if you live somewhere with alternative mail delivery such as a plane or ferry. Please confirm with your local courier if they can deliver Dangerous Goods.

Shipping Rates for Lead Acid Batteries and Corrosives